Honda Tech Tip: Low Tire Pressure And TPMS Indicator On After Recent Tire Replacement

Honda Tech Tip: Low Tire Pressure And TPMS Indicator On After Recent Tire Replacement

The Honda CR-V uses an indirect TPMS system that uses the rolling circumference of the tire to determine the pressure in the tire. Differences in sidewall construction and weight of a replacement tire can cause the rolling circumference to change if a single tire is replaced.

Models: 2014-2016 CR-V

The Honda CR-V uses an indirect TPMS system that uses the rolling circumference of the tire to determine the pressure in the tire. Differences in sidewall construction and weight of a replacement tire can cause the rolling circumference to change if a single tire is replaced. Because of the way indirect TPMS works, those differences will cause the Low Tire Pressure/TPMS indicator to come on.

One of the original equipment tires is the Continental CrossContact LX, size 225/65R17 (P/N 42751-CTL-010, DOT ID CN5L). Made in France, it has a 1-ply sidewall construction. These tires have been discontinued, but there’s a limited supply still available until they run out. The official replacement is now made in Portugal. This tire (P/N 42751-CTL-027, DOT ID AF5L) has a 2-ply sidewall construction. There’s also a U.S.-made tire (P/N 42751-CTL-009, DOT ID A32Y) that will work. It has a 2-ply sidewall construction, but it’s a bit heavier than the French- and Portuguese-made tires.

The online owner’s manual recommends replacing all four tires at the same time. But if that’s not practical, the French- and Portuguese-made tires should be replaced as a pair (right and left front tires, right and left rear tires). Since the U.S.-made tires are heavier than the French- and Portuguese-made tires. all four tires must be replaced.

You May Also Like

Honda Oil System Inspection

The leading cause of low oil pressure-related complaints with Honda vehicles is the oil level.

Just about every engine lubrication system, including Honda’s, operates the same in theory. An oil pump generates the pressure, oil is sent to oil galleys, and then flows back into the pan. In practice, however, it is much more complicated. An oil system practically manages a controlled leak into the oil pan.

Lexus Air Ride Repair

A conversion kit might cost less and provide better long-term results for the customer.

Toyota Direct Injection? Port Injection? Why Not Both?

Port fuel injection and direct fuel injection systems each have their advantages and disadvantages.

Toyota Squeaking Noise From Rear Suspension 

Follow the repair procedure in this bulletin to address this condition.

Toyota Milliwave Calibration Tips

Calibration is necessary due to several factors affecting the radar’s functionality.

Other Posts

Exhaust Gas Recirculation Operation and Diagnosis

Since exhaust gas does not burn, this lowers the combustion temperatures and reduces NOx emissions from the engine.

Honda to Establish EV Value Chain in Ontario, Canada

It will strengthen EV supply system and capability with an eye toward a future increase in EV demand in North America, Honda said.

Don’t Miss The April Digital Edition of ShopOwner

The April issue includes technical and management content and is free to download.

Now Available – March’s Digital Edition of ShopOwner

The March issue includes technical and management content and is free to download.