EV lockout tagout procedures help technicians safely service high-voltage electric vehicle systems. Unlike gasoline vehicles, where disconnecting the 12-volt battery may be enough, EVs can operate at more than 400 volts. Some systems can reach 800 volts.
Accidentally energizing one of these circuits can have catastrophic consequences. For that reason, many EV manufacturers require a lockout tagout, or LOTO, procedure before technicians service high-voltage components.
How EV Lockout Tagout Works
Before work begins, the technician isolates the high-voltage battery from the rest of the vehicle.
Depending on the manufacturer, this may require removing the service disconnect plug or opening a manual service disconnect. It may also involve disabling the battery through a specific factory procedure.
Lockout tagout adds another layer of protection. Instead of removing the disconnect and setting it aside, the technician secures it with a lock or locking device. This prevents someone from accidentally reinstalling it.
A tag identifies who removed the disconnect, when it was removed and why the vehicle was disabled.
Preventing Accidental Re-Energization
The lockout tagout process helps prevent another technician from unknowingly reconnecting the high-voltage system.
For example, a technician may be replacing a battery heater, inverter or high-voltage cable. Another technician could see the removed service disconnect and assume someone forgot to reinstall it.
Reinstalling the disconnect could re-energize hundreds of volts while the first technician is still working on the vehicle.
Lockout tagout helps prevent this situation by physically preventing reconnection. The tag also makes it visually clear that the vehicle is being serviced.
Verify Zero Voltage Before Repairs
Many manufacturers also require technicians to verify zero voltage after isolating the high-voltage system.
Technicians should not assume the system is de-energized. Instead, they verify it using proper high-voltage-rated test equipment.
This step is important because capacitors inside inverters and other components can retain dangerous voltage for several minutes after battery disconnection.
High-Voltage EV Safety Procedures
Lockout tagout is an important safety procedure when servicing an electric vehicle. It protects the technician and others in the shop while preventing the high-voltage system from being energized during repairs.
The process is straightforward: isolate the system, lock it, tag it and verify zero voltage before beginning the repair.
Watch more episodes of EV IQ here.
This video is sponsored by Auto Value and Bumper to Bumper.





