Tech Tip: Chrysler 2.7 Oil Pressure Loss

Tech Tip: Chrysler 2.7 Oil Pressure Loss

The AERA Technical Committee offers the following information regarding sudden loss of oil pressure on 1997-2005 Chrysler 2.7L VIN R, U and V engines. This loss of engine oil pressure has usually occurred shortly after replacement of the engine oil pump.

The AERA Technical Committee offers the following information regarding sudden loss of oil pressure on 1997-2005 Chrysler 2.7L VIN R, U and V engines. This loss of engine oil pressure has usually occurred shortly after replacement of the engine oil pump.

It has been reported that certain replacement oil pumps on the above-mentioned engine use an expansion plug to secure the oil pressure relief valve within the pump cover. If the plug dislodges, a loss of oil pressure will result, as oil will route back into the oil pan.

The original design pump incorporates a screw-in plug to secure the pressure relief valve as shown in Figure 1. No reports have been received of that style plug coming loose during regular engine operation.

This oil pump also relies on correct crankshaft location when installing to prevent engine damage. Refer to Figure 2 and observe the location marks while the #1 cylinder piston is 60° after top dead center (ATDC).

You May Also Like

Fuel Pumps and Cranking

Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.

Here is a diagnostic puzzle: An owner comes to your shop complaining that it takes longer than expected to start his car’s engine in the morning. There are no codes for the crankshaft and camshaft sensors. And, the oil pressure is within specifications. If you are lucky, you might have a code for low fuel pressure on the high side of the direct injection system. What could be the source of the problem?

Melted Connectors

Too Much Current…or Something Else?

Solving Intermittent Overheating

New cooling systems anticipate and influence changes in coolant temperature.

Hyundai Genesis Dongle Causing Multiple Issues

Aftermarket dongles may interfere with the Control Area Network (CAN) system, causing issues.

Audi Remote Key Inoperative

Replacing the remote will not resolve the concern. 

Other Posts
Mercedes-Benz: Replacing Bolts at Steering Gear

Work procedures vary slightly for certain platforms. This article outlines the different procedures to follow.

ADAS Calibration Aborts

Knowing the common “hiccups” can save you time and money.

Strut Sales

It all comes down to educating the customer about the benefits and asking for the sale.

Hyundai DDMS Customer Complaints

The following Advanced Driver Assistance Systems (ADAS) features may be affected.