Watch Now: Drilled & Slotted Rotors Livestream

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
  • aftermarketNews website
  • AutoSuccess website
  • BodyShop Business website
  • Brake & Front End website
  • The Buzz EV News website
  • Counterman website
  • Engine Builder website
  • Fleet Equipment website
  • Motorcycle & Powersports News website
  • Professional Carwashing & Detailing website
  • TechShop website
  • Tire Review website
  • Tomorrow's Tech website
  • Tomorrow's Tech University website
  • Transmission Digest website
  • Underhood Service website
Import Car
Providing technical information and service resources to the import vehicle community
Tech Tips

Watch Now: Drilled & Slotted Rotors Livestream

Experts from Summit Racing and Babcox Media’s Tech Group discuss performance rotors and their impact on driving.

ImportCar Staff Writers
By ImportCar Staff Writers
Published:

In a one-hour Livestream sponsored by Summit Racing, Andrew Markel and the experts at Summit Racing covered the benefits of drilled and slotted rotors for the track and daily drivers.

Related Articles

The experts from Summit Racing and Tomorrow’s Technician answered the following questions:

  • How can a lighter brake rotor outperform a heavier rotor? 
  • How should a hole or slot be drilled or cut to prevent cracking?
  • Can the holes or slots increase or decrease braking performance? 
  • What are some of the best-looking slot and hole patterns? 
  • Can a drilled or slotted rotor be machined on a bench lathe?

O’Reilly 2021 School of the Year instructor Jack Stow and his classes at CTECH Auto joined in and asked questions too!

You May Also Like

Tech Tips

ADAS Calibration Aborts

Knowing the common “hiccups” can save you time and money.

Andrew Markel
By Andrew Markel
Andrew Markel is an ASE Certified Technician and former service writer, and he brings this practical knowledge to the ImportCar team as director of content. He has more than 20 years on the staff of Import Car.
Published:

If you have invested in the fixtures and scan tools to perform ADAS calibrations, you know most systems will walk you through the entire process. But, what happens when you follow the directions and the process still won’t initialize or complete or a malfunction light comes on?

Read Full Article

More Tech Tips Posts
Fuel Pumps and Cranking

Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.

By ImportCar Staff Writers
Electric Power Steering Diagnostics

Load management for steering systems.

By ImportCar Staff Writers
Solving VW False Fuel Pressure Reading

First, verify the customer did not run out of fuel at the time the DTCs were stored.

By ImportCar Staff Writers
vw steering wheel squeak
Tech Tips for Dorman’s OE FIX Steering Tie Rod End Assembly

Read the tech note for tips on installation of this unique fix.

By ImportCar Staff Writers

Other Posts

Servicing Mercedes-Benz AMG Brakes

Take a look at some of the things you need to know in order to service the brakes on a Mercedes-Benz AMG vehicle.

By ImportCar Staff Writers
Toyota Regenerative Braking System

The brake system of a hybrid may have multiple components to perform regenerative braking and pedal simulation.

By Andrew Markel
Identifying Brake Issues With Brake Dust

Brake dust can indicate what could be wrong. This video is sponsored by Auto Value and Bumper to Bumper.

By Andrew Markel
Top 10 Brake Mistakes

Here are the top 10 brake mistakes technicians can make.

By ImportCar Staff Writers