ADVICS Tech Tip: Proper Master Cylinder Installation

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
  • aftermarketNews website
  • AutoSuccess website
  • BodyShop Business website
  • Brake & Front End website
  • The Buzz EV News website
  • Counterman website
  • Engine Builder website
  • Fleet Equipment website
  • Motorcycle & Powersports News website
  • Professional Carwashing & Detailing website
  • TechShop website
  • Tire Review website
  • Tomorrow's Tech website
  • Tomorrow's Tech University website
  • Transmission Digest website
  • Underhood Service website
Import Car
Providing technical information and service resources to the import vehicle community
Tech Tips

ADVICS Tech Tip: Proper Master Cylinder Installation

Fluid leakage and improper hydraulic pressure may cause brake failure.

ImportCar Staff Writers
By ImportCar Staff Writers
Published:

1. Ensure that mounting areas of the master cylinder and the pipe joints are free of damage and debris. Fluid leakage and improper hydraulic pressure may cause brake failure.

Related Articles

2. Do not allow dust, dirt and debris to enter the master cylinder or reservoir tank. Internal damage may occur, resulting in fluid leakage and improper hydraulic pressure.

3. Always use a new O-ring or gasket if required for installation. Ensure proper installation of the O-ring or gasket for proper sealing. Fluid leakage and improper hydraulic pressure may cause brake failure.

4. Use grease on O-rings and gaskets before installation for proper sealing and installation. Grease will help seal and install the brake master cylinder correctly to ensure proper hydraulic pressure.

5. Handle with care. Brake master cylinders are precision manufactured. Do not drop or deform. Never use a damaged unit.

6. Tighten bolts, nuts, and screws and utilize the proper tools as specified by the service information. Damage of screws and threads may cause improper braking function.

7. Use new brake fluid that is specified by the manufacturer’s service information. Bleed the air accordingly to release trapped air within the hydraulic system.

You May Also Like

Tech Tips

ADAS Calibration Aborts

Knowing the common “hiccups” can save you time and money.

Andrew Markel
By Andrew Markel
Andrew Markel is an ASE Certified Technician and former service writer, and he brings this practical knowledge to the ImportCar team as director of content. He has more than 20 years on the staff of Import Car.
Published:

If you have invested in the fixtures and scan tools to perform ADAS calibrations, you know most systems will walk you through the entire process. But, what happens when you follow the directions and the process still won’t initialize or complete or a malfunction light comes on?

Read Full Article

More Tech Tips Posts
Fuel Pumps and Cranking

Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.

By ImportCar Staff Writers
Electric Power Steering Diagnostics

Load management for steering systems.

By ImportCar Staff Writers
Solving VW False Fuel Pressure Reading

First, verify the customer did not run out of fuel at the time the DTCs were stored.

By ImportCar Staff Writers
vw steering wheel squeak
Tech Tips for Dorman’s OE FIX Steering Tie Rod End Assembly

Read the tech note for tips on installation of this unique fix.

By ImportCar Staff Writers

Other Posts

Checklist: Winter Brake System Issues to Look Out For

Welcome to January, where much of the United States has begun to experience cold temperatures, snowstorms and icy roads. Depending on where your shop is located, you could be looking at another three months of cold, wet weather, bringing with it the usual wear-and-tear to customers’ vehicles. You know the importance of always performing a

By ADVICS
Recommending the Best Brake Pads for Your Customer

As a technician, you know the importance of recommending the best brake pads possible for your customers. Often, this decision really comes down to determining which friction material is the best fit for the customer’s needs. To do this, let’s break down the differences between each of the three brake pad material types. Organic Brake

By ADVICS
Tips for Counter Pros: Answering Brake Pad FAQs

When it comes to recommending brake pads to your customers, there’s a lot to consider. As a counter professional, you’re likely an educator for your DIY customers, providing product recommendations based on pricing, installation hardware, warranty information and more. Here are some tips from the ADVICS team, designed to help you navigate some of the

By ADVICS
Key Considerations for ADAS Brake Jobs

As a technician, you could likely carry out a brake job in your sleep, but with automotive technology constantly evolving, what used to be a straightforward service can now require some additional steps and considerations to ensure that your customer’s brakes are in good working order. This is especially true when performing brake service on

By ADVICS