Tech Tip: Toyota Rear ABS Speed Sensor Removal

Tech Tip: Toyota Rear ABS Speed Sensor Removal

Failure to remove the ABS speed sensor prior to

Failure to remove the ABS speed sensor prior to ­removal of the rear axle or suspension on 1997-2000 Camry and Avalon models and 1999-2000 Solaras may cause the ABS warning light to illuminate or damage the ABS speed sensor wire harness.

Service Information:

1. Prior to the removal/replacement of the rear axle, rear coil spring and rear shock absorber, be sure to remove the rear ABS speed sensor from the rear axle by removing the three bolts shown in Fig. 1.

2. Check the speed sensor signal after installation.

Courtesy of ALLDATA.

 For additional information, visit www.alldata.com.

You May Also Like

Regenerative Braking Service

Regenerative braking takes the forward motion of the vehicle and turns it into electrical energy.

Regenerative braking is nothing new – it’s been around just about as long as there have been electric trolley cars and electric trains. And it’s not even a case that it hasn’t been around for a very long time in the auto industry. The difference is that the automotive industry has only recently adopted a large-scale regenerative braking system for itself with the advent of the modern hybrid and electric car.

Toyota Prius Battery Codes P0A7F, P2011 and P0A80

A second generation Toyota Prius is at least 12 years old and batteries may need to be replaced. Here’s what the codes mean.

Air Ride Diagnostics: Reservoirs and Compressors

The secret to diagnosing air ride problems is knowing what criteria the system uses to regulate the compressor/reservoir and having the right tool.

Mazda SkyActiv Engine Service Tips

These engines have been reliable, but there are four pattern failures you might see.

Honda Indirect TPMS Systems

Honda indirect TPMS systems do not have air pressure sensors inside the tires.

Other Posts

Don’t Miss The April Digital Edition of ShopOwner

The April issue includes technical and management content and is free to download.

Solving Intermittent Overheating

New cooling systems anticipate and influence changes in coolant temperature.

Now Available – March’s Digital Edition of ShopOwner

The March issue includes technical and management content and is free to download.

Today’s Fuel Pressure Diagnostics

Direct injection pressure is measured with sensors, and the signals are used to determine pump speed and/or volume.