Tech Tip: Prius Brake Actuator Noise

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
  • aftermarketNews website
  • AutoSuccess website
  • BodyShop Business website
  • Brake & Front End website
  • The Buzz EV News website
  • Counterman website
  • Engine Builder website
  • Fleet Equipment website
  • Motorcycle & Powersports News website
  • Professional Carwashing & Detailing website
  • TechShop website
  • Tire Review website
  • Tomorrow's Tech website
  • Tomorrow's Tech University website
  • Transmission Digest website
  • Underhood Service website
Import Car
Providing technical information and service resources to the import vehicle community
Asian

Tech Tip: Prius Brake Actuator Noise

Some 2004 - 2007 model year Prius vehicles may exhibit a squeak-type noise when pressing or releasing the brake pedal. This noise may only be audible when the vehicle is in "READY" mode and the vehicle is not moving. Brake system performance is not affected by this noise. Use the following procedure to address this concern ....

ImportCar Staff Writers
By ImportCar Staff Writers
Published:

Vehicles: 2004 – 2007 Prius

Related Articles

Some 2004 – 2007 model year Prius vehicles may exhibit a squeak-type noise when pressing or releasing the brake pedal. This noise may only be audible when the vehicle is in “READY” mode and the vehicle is not moving. Brake system performance is not affected by this noise. Use the following procedure to address this concern.

1. Confirm noise condition by pressing/releasing the brake pedal.

2. Bleed the brake system with a scan tool and the correct repair procedure. If the noise is NO longer present when pressing/releasing the brake pedal, the repair is complete. If the noise is still present, go to step 3.

3. If the noise is still present, replace the Brake Actuator Assembly.
Refer to your source of repair information for the correct procedure.

4. Road test for proper operation.

You May Also Like

European

Volvo Engine Service

There are many combinations for the Volvo modular engine.

Andrew Markel
By Andrew Markel
Andrew Markel is an ASE Certified Technician and former service writer, and he brings this practical knowledge to the ImportCar team as director of content. He has more than 20 years on the staff of Import Car.
Published:

If an engine manages to stay in production for 25 years, it is a testament to the engineering inside. This is the case of the Volvo Modular Series engine that outlasted Ford and was just retired by Geely. The Volvo modular design that can have four, five or six cylinders made its debut in 1990 in the 960 sedan as a six-cylinder and never stopped improving.

Read Full Article

More Asian Posts
Nissan Electro Hydraulic Steering

Nissan’s steering system is susceptible to driver-error.

By Andrew Markel
Toyota Regenerative Braking System

The brake system of a hybrid may have multiple components to perform regenerative braking and pedal simulation.

By Andrew Markel
Regenerative Braking Service

Regenerative braking takes the forward motion of the vehicle and turns it into electrical energy.

By Andrew Markel
Toyota Prius Battery Codes P0A7F, P2011 and P0A80

A second generation Toyota Prius is at least 12 years old and batteries may need to be replaced. Here’s what the codes mean.

By Andrew Markel

Other Posts

Don’t Miss The April Digital Edition of ShopOwner

The April issue includes technical and management content and is free to download.

By Doug Kaufman
ZF Expands SACHS CDC Shock Line for U.S., Canada

The release expands ZF’s line by more than 70% reflecting growing demand for advanced damping technology in the aftermarket.

By ImportCar Staff Writers
Philips Announces Xperion 6000 LED Under Hood Work Light

It features a motion detection switch that allows mechanics to turn the light on and off with a wave of their hand.

By ImportCar Staff Writers
Servicing Mercedes-Benz AMG Brakes

Take a look at some of the things you need to know in order to service the brakes on a Mercedes-Benz AMG vehicle.

By ImportCar Staff Writers