Tech Tip: Ford Ticking Noise at Idle

Tech Tip: Ford Ticking Noise at Idle

Some 2008-’10 Focus vehicles built on or before December 23, 2009 may exhibit a ticking noise from the fuel rail or injectors at idle.

Figure 1Affected models: 2008-’10 Focus, built on or before December 23, 2009.

Some 2008-’10 Focus vehicles built on or before December 23, 2009 may exhibit a ticking noise from the fuel rail or injectors at idle that may sound like upper valvetrain noise.

Follow the Service Procedure steps to correct the condition.

Service Procedure

1. Remove the two fuel rail to the cylinder head attaching bolts to allow access for cover (P/N 9E5Z-9K540-A) installation.

 

See Figure 1.

 

Note: It is not necessary to remove the fuel rail.

2. Slide the insulator over the fuel rail. Water may be used to aid in installation.

 

See Figure 2.

 

Note: Do not use any other form of lubrication.

3. Reposition the fuel rail and tighten fuel rail bolts 18 lb.-ft. (25 Nm).

Courtesy of ALLDATA.

You May Also Like

Nissan Electro Hydraulic Steering

Nissan’s steering system is susceptible to driver-error.

Nissan’s electro-hydraulic power steering system provides the same feel of a conventional hydraulic power steering system while improving fuel economy by using an electric motor to power the pump. The system is comprised of the electro-hydraulic pump assembly, control module and steering gear.

The power steering module is on top of the pump, and the motor controls the speed of the power steering pump according to vehicle speed and steering angle. By changing the pump speed, the module controls the steering assist force. The control module is connected to the hi-speed CAN bus that ties the engine control module (ECM) and ABS module. The ABS module provides vehicle speed and steering angle, and torque data to the power steering system. The connection to the ECM allows the alternator to provide enough power when the pump is running.

Toyota Regenerative Braking System

The brake system of a hybrid may have multiple components to perform regenerative braking and pedal simulation.

Regenerative Braking Service

Regenerative braking takes the forward motion of the vehicle and turns it into electrical energy.

Toyota Prius Battery Codes P0A7F, P2011 and P0A80

A second generation Toyota Prius is at least 12 years old and batteries may need to be replaced. Here’s what the codes mean.

Air Ride Diagnostics: Reservoirs and Compressors

The secret to diagnosing air ride problems is knowing what criteria the system uses to regulate the compressor/reservoir and having the right tool.

Other Posts

Timing BMW VANOS N53 And N54 

To service them, you will need the appropriate toolset to lock the crank and camshaft.

Don’t Miss The April Digital Edition of ShopOwner

The April issue includes technical and management content and is free to download.

VW/Audi PCV Service

The PCV valve regulates the flow of gases from the crankcase.

Philips Announces GoPure GP5212 Automotive Air Purifier

It uses a 3-layer filter to deliver cleaner, healthier, fresher air on the go, Lumileds said.