Inspecting Brake Hydraulic Systems: Worn Components Take Their Toll on Advanced Suspension Technologies
During a service writer’s efforts to sell competitive brake services at the service desk, he or she often focuses on selling “good, better or best” brake friction replacements, while ignoring the added expense of repairing brake hydraulics. Did you know that neglected brake system hydraulics can cause an expensive warranty comeback?
Mazda3i Vehicle Maintenance Checks
For this article, we’ll be looking at a 2006 Mazda3i. We won’t spend much time on performing routine maintenance services, as we should all be familiar with the nuts and bolts of the job. The most important thing to ask yourself is, why are you doing this service? Sure it’s important to get fresh fluids and
10 Brake Comeback Solutions
Nothing is worse than a customer returning to your shop after a brake job complaining of a noise or performance issue. These comebacks can be frustrating because they cost your shop’s productivity and reputation. Continue reading for 10 tips that can help you solve a brake comeback due to noise in less time.
New Raybestos Brand Brake Parts Released for Acura and Volvo
Affinia Group has announced that brake pads, calipers and rotors have been added to the Raybestos brakes catalog for 2013 Acura and Volvo models.
Honeywell Friction Materials Recognized by Automotive Distribution Network for Bendix Product Innovation
As a testament to its history of driving innovation, Bendix was recognized for product innovation excellence by the Automotive Distribution Network at its 2012 Network National Convention in Las Vegas.
Tech Tip: VW/Audi Calipers Don’t Retract When Replacing Rear Brake Pads
Vehicle Applications: 2004 A8 Quattro 4.2 2005-’06 A6 Quattro 4.2 2005-’07 A6 Quattro 3.2 2005 A8 Quattro 4.2 and 6.0 2006 Passat 3.6 2006-’07 Passat 2.0 2009 Q5 3.2 Customer Concern: When replacing the rear brake pads, the technician cannot get the calipers to retract. Tests/Procedures: 1. With a factory-compatible scan tool, read and
Brake Job on 2000-2006 Hyundai Elantra
The initial inspection revealed the front rotors were below specifications and had uneven pad wear on the right front inboard pad. The rear drums were also out of specification and a leaking wheel cylinder had contaminated the brake shoes. Hyundai recommends replacement of the wheel cylinders if any brake fluid is found in the dust boots. Runout measurements of the rotors and hubs revealed little or zero runout.
BRAKE JOB: 2004-2009 Mazda3
The 2004-2009 Mazda3 is based on the Ford global C1 platform, shared with the European Ford Focus and Volvo S40. Nothing is really groundbreaking about the brake system. But, not paying attention to the details can end in a post brake job comeback.
7 Brake Myths Busted
There are some myths about brake pads, rotors and hydraulics that need to be busted. These myths can hurt and hinder a technician’s ability to diagnose and solve some brake problems and customer concerns. On the surface, some of these myths make sense. The logic can seem sound and explain a problem, but they do not resolve the real issues with a brake system.
Federal-Mogul Adds New Foreign Nameplate and Domestic SKUs to Wagner ThermoQuiet Brake Pad Line
The Wagner ThermoQuiet line of replacement brake pads now includes ceramic rear disc pad sets for the 2012 Fiat 500 and Ford Focus. Federal-Mogul says the expansion comes as a result of the company’s continued focus on new late-model application coverage.
Performing a Brake Job on a 2002-2009 Chevrolet Trailblazer
The Chevrolet Trailblazer is based on the GMT 360. The brake system on the Trailblazer is not groundbreaking by any means, but there are some intricacies technicians should be aware of on this common platform. The front brakes utilize dual piston calipers with phenolic pistons. The most important thing to remember when replacing the pads on this vehicle is to replace the hardware.
Fras-le Brings Formula Truck to AAPEX 2011
Fras-le North America Inc. will exhibit at AAPEX 2011, Nov. 1-3, at the Sands Expo Center in Las Vegas, NV, with a unique twist. The company has turned part of its booth (#2658) into an interactive foam cast display of a Class 8 truck to show off its sponsorship of Formula Truck.