Honda Odyssey Brake Job: 2018-Current

Brake Job: 2018-Current Honda Odyssey

Using a low-quality brake pad or reusing the abutment clips can lead to a noise comeback.

The brake system on the 2018 and newer Honda Odyssey is very conventional except for the rear brakes. The only recall has been for air trapped in the rear calipers. 

The only difference between the previous Odyssey is the introduction of “Geomet” coating on the caliper guide pin bolts. Honda recommends the bolts be replaced if the pads are replaced. They claim the coating can be scraped away and lead to corrosion.  

The rear brakes have an electric parking brake with electric actuator motors on the calipers. The actuators need to be removed to service the rear pads. First, the system must be put into maintenance or pad exchange mode. The final retraction of the piston can be performed with a T45 torx socket. 

When you remove the actuators, an O-ring seals it to the caliper. Honda recommends using a new O-ring if the caliper is removed. The seal protects the expensive actuator against road spray and brake dust. These actuators use two planetary gear sets and a belt. Moisture and dirt can damage the mechanism.

After the new brake pads are installed, if you have a scan tool with the correct software, turn the vehicle to the ON mode.

Select ADJUSTMENT from the ABS/TCS/VSA menu with the scan tool, then enter the “BACK TO NORMAL MODE” from the maintenance mode, and follow the screen prompts. 

The adjustment procedure can be performed without a scan tool. After installing the pads and caliper, turn the vehicle to ON mode. Apply the parking brake, then release the parking brake. Next, turn the vehicle to the OFF (LOCK) mode.   Every 1,864 miles without applying the parking brake, the parking brake will perform an adjustment to compensate for brake pad wear when the vehicle is off. 

This generation of Odyssey is like any other Honda when it comes to servicing the brakes. Using a low-quality brake pad or reusing the abutment clips can lead to a noise comeback.

You May Also Like

2002-2013 Mini Cooper Alignment

First- and second-generation Mini Coopers are not a difficult car to align.

First- and second-generation Mini Coopers are not a difficult car to align. 2002-2006 models are designated R50 models, and 2007-2013 models are R56 models. The convertible is called a R52, the Clubman is a R55, and the first-generation S-Models are R53s. 

The 2002-2013 models had a conventional strut front suspension. In 2007, BMW redesigned the Mini to make it bigger and improve the geometry of the rear suspension so it could accommodate a differential and axles for an all-wheel-drive system. 

ADAS Calibrations: Protecting Safety with Precision and Training

Calibration is a safety-critical service. Explain training, time and common repairs to build trust and justify costs.

2007-2017 Hyundai TPMS Guide

If you are initializing a sensor or doing a manual relearn, you will need a TPMS tool that can capture the sensor IDs and program them into the TPMS module.

Mercedes-Benz Airmatic Suspension: Relays, Compressors and Leak Fixes

There are three main problem areas for Airmatic suspensions: relays, compressors and leaking airbags. Let’s take a look at each of these, and what you can do about them in the bays.

Servicing Mercedes-Benz AMG Brakes

There are three different braking systems which are being used on late-model Mercedes-Benz AMG vehicles.

Other Posts
How Regenerative Braking Changes Repair and Inspection

Brake condition assessments should account for both friction material wear and the effects of limited brake usage.

Momentum USA Adds 12 Brake Part Numbers

These include rear brake pads for Ford commercial vans; front ceramic pads for electric vehicles; and rotors for luxury and performance vehicles.

Understanding Honda’s Variable Valve Timing System

VTEC adds a layer of complexity to any engine, and it does sometimes come with some service bugs, despite Honda’s reputation for reliability.

Read the September Digital Edition of ShopOwner Now

The latest issue includes technical, management and commentary content and is free to download.