Tech Tip: Mitsubishi Electrical Problems

Tech Tip: Mitsubishi Electrical Problems

A simple electrical problem can be a major inconvenience for owners of some Mitsubishi Eclipse and Galant models. Some vehicles may intermittently experience loss of power to items such as: radio, dome light, sun visor vanity light and remote keyless entry. The dome light switch slider may become loose, allowing the slider to rotate and contact the adjacent terminal. This causes a short circuit, which blows the ....

By Rich Diegle
Senior Automotive Editor

A simple electrical problem can be a major inconvenience for owners of some Mitsubishi Eclipse and Galant models. Some vehicles may intermittently experience loss of power to items such as: radio, dome light, sun visor vanity light and remote keyless entry.

The dome light switch slider may become loose, allowing the slider to rotate and contact the adjacent terminal. This causes a short circuit, which blows the IOD fuse (indicated below). The fuse typically will blow when the dome light switch is in the OFF position and the Remote Keyless Entry transmitter LOCK or UNLOCK button is pushed.

Model Years IOD Fuse
1999 – 2001 #4
2002 #18
2003 – 2005 #22

Affected Vehicles
2000 – 2005 Eclipse models without factory-­installed sunroof
1999 – 2003 Galant

Required Part
Super glue

Repair Procedure
(Review safety procedures in ALLDATA Repair before beginning.)
 
1. Remove the dome light assembly.

2. Inspect the position of the dome light switch slider bar with the switch in the OFF position (see photo). The screw securing the switch slider may come loose, allowing the slider to rotate and contact the adjacent terminal.

3. If the slider bar is loose and in the incorrect position, move it to the correct position and tighten the screw securely.

4. Apply a drop of super glue on the screw and slider to keep the screw from loosening and the slider from moving.

5. Reinstall the dome light assembly into the vehicle.

6. Replace the dedicated IOD fuse and confirm operation of the affected functions.

Written by ALLDATA Senior Automotive Editor, Rich Diegle. Rich is an Advanced Engine Performance Certified, ASE Master Technician with an AA Degree in automotive technology and 23 years of dealership and independent shop experience.

For additional information, visit www.alldata.com.

You May Also Like

Regenerative Braking Service

Regenerative braking takes the forward motion of the vehicle and turns it into electrical energy.

Regenerative braking is nothing new – it’s been around just about as long as there have been electric trolley cars and electric trains. And it’s not even a case that it hasn’t been around for a very long time in the auto industry. The difference is that the automotive industry has only recently adopted a large-scale regenerative braking system for itself with the advent of the modern hybrid and electric car.

Toyota Prius Battery Codes P0A7F, P2011 and P0A80

A second generation Toyota Prius is at least 12 years old and batteries may need to be replaced. Here’s what the codes mean.

Air Ride Diagnostics: Reservoirs and Compressors

The secret to diagnosing air ride problems is knowing what criteria the system uses to regulate the compressor/reservoir and having the right tool.

Mazda SkyActiv Engine Service Tips

These engines have been reliable, but there are four pattern failures you might see.

Honda Indirect TPMS Systems

Honda indirect TPMS systems do not have air pressure sensors inside the tires.

Other Posts

Solving Intermittent Overheating

New cooling systems anticipate and influence changes in coolant temperature.

Today’s Fuel Pressure Diagnostics

Direct injection pressure is measured with sensors, and the signals are used to determine pump speed and/or volume.

ADAS Calibration Tips

Here are 10 tips to follow during ADAS Calibration.

ADAS Calibration Aborts

Knowing the common “hiccups” can save you time and money.