Lexus/Toyota Timing Belt Replacements (VIDEO)

Toyota/Lexus: Best Practices for Timing Belt Replacements

Service procedures are not suggestions. This video is sponsored by Continental.

CC:

Service procedures are not suggestions. The step by step service procedures for a timing belt were developed for two reasons. First, the steps were developed to replicate how the timing belt was installed at the factory. Second, the procedures are developed to help technicians do the job in the least time possible. Sure, you might be able to replace the belt without the service information, but are you sure the tension is correct? Are the bolts torqued to the correct specification? Did you line up the correct timing marks? You will never know if you don’t follow the service procedures. Our timing belt kits will include the timing belt replacement procedures.

For example, here is Continental timing belt kit TB257K2. Inside the box are two sets of service procedures. This guide covers the 1MZ-FE Toyota V6 found in the Lexus ES 300 and Toyota Highlander. The second set of service procedures covers the 3MZ-FE found in later Highlander, Camry, Sienna, and Lexus models.

For the 1MZ-FE, the procedures start with removing the right front wheel and ends with how to check the timing marks. The instructions include the correct procedures to activate the auto tensioner. For the 3MZ-FE, there are additional steps covering the removal of engine mounts and the alternator bracket for specific models. The real bombshell is the timing marks on the crank shafts are different for the 1MZ-FE and 3MZ-FE.

Also included in the box is a list of water pump installation recommendations. The recommendations include cleaning the mounting surface and addressing corrosion inside the pump cavity. This sheet also stresses the importance of removing all coolant from the block radiator and flushing the entire system before the new pump is installed. Even if you have done many timing belts on Toyota V6s and have a photographic memory, you still need the service procedures. By having these, you can avoid making mistakes that could cost you time and possible damage to the engine. Thanks for watching, and we’ll see you next time.

This video is sponsored by Continental.

You May Also Like

Introduction to the Maverick Tire Changer

Joe Keene speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.

Joe Keene, automotive content video producer at Babcox Media, speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer and runs thorough a demonstration of a typical low-profile sidewall procedure. This video is sponsored by Hunter Engineering Co.

Schaeffler and Sustainability with Jerry Conroy

Conroy shares insights into his career trajectory, the evolving landscape of the company’s aftermarket operations, and its commitment to innovation and sustainability.

Flushing the Brake Fluid is Critical on Every Brake Repair

Making sure the brake fluid is the correct quality is critical. Sponsored by Auto Value and Bumper to Bumper.

Selecting the Right Oil for your Customers Engine

Learn how to educate customers on the importance of OEM specifications and premium lubrication for their vehicles’ maintenance needs.

At the Intersection of Tradition and Innovation with Grace Hovis

Grace Hovis’s journey in Hovis Auto & Truck Supply blends tradition with digital innovation in the automotive aftermarket industry.

Other Posts

Continental Tire Opens Retread Solutions Center in South Carolina

The company said it hopes to uncover new improvements and technologies to innovate the retread process.

Turbocharger Maintenance ft. Rein TechSelect Turbo Kits

Learn about common challenges with turbocharger maintenance and how Rein TechSelect Turbo Kitsmake the repair process easier for technicians.

Toyota Regenerative Braking System

The brake system of a hybrid may have multiple components to perform regenerative braking and pedal simulation.

The Standard® Advantage

Standard® knows that what comes out of a repair is directly dependent upon what goes into the box. This video is sponsored by Standard®.