Toyota Tech Tip: A/C Inoperative, A/C Light Flashing

Toyota Tech Tip: A/C Inoperative, A/C Light Flashing

This bulletin provides information regarding countermeasures to the A/C magnetic clutch relay for A/C light flashing (inoperative A/C) issues on some vehicles equipped with a magnetic clutch compressor.

This bulletin provides information regarding countermeasures to the A/C magnetic clutch relay for A/C light flashing (inoperative A/C) issues on some vehicles equipped with a magnetic clutch compressor.

Affected Models:
• 2001-’04 Camry, ECHO and Celica;
• 2002-’04 4Runner, Corolla and MR2 Spyder; and
• 2003-’04 Highlander, Matrix, Sienna and Solara.

Inspection Procedure:
1. Locate the A/C magnetic clutch relay.

2. Verify the part number printed on the side of the relay.

a. If the part number is 90987-02022, replace the relay with the countermeasured relay, P/N 90987-02028.

b. If the part number does not match 90987-02022, diagnose problems by referring to the Technical Information System (TIS): applicable model year and vehicle repair manual, Air Conditioning: Troubleshooting.

Note: Relays other than P/N 90987-02028 should not be used for this application.

For additional information, visit www.alldata.com.

Technical service bulletin courtesy of ALLDATA.

You May Also Like

Today’s Fuel Pressure Diagnostics

Direct injection pressure is measured with sensors, and the signals are used to determine pump speed and/or volume.

Ever since the fuel pump was moved to the fuel tank, fuel pressure replaced the float height as a measure of fuel system health and performance. Checking the height of the float might have required some disassembly or special tools to bend the arms of the float.

When the shift was made to port or throttle body fuel injection, all a technician needed to diagnose a fuel problem was a set of “noid lights,” a fuel pressure gauge and maybe a multi-meter. Measuring the fuel pressure typically required checking the pressure at idle and under load. Most of the these tools can’t be used on the high pressure side of a direct-injection system because of higher pressures and changes in the injector location and technology. 

ADAS Calibration Tips

Here are 10 tips to follow during ADAS Calibration.

ADAS Calibration Aborts

Knowing the common “hiccups” can save you time and money.

Fuel Pumps and Cranking

Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.

Electric Power Steering Diagnostics

Load management for steering systems.

Other Posts

Don’t Miss The April Digital Edition of ShopOwner

The April issue includes technical and management content and is free to download.

Now Available – March’s Digital Edition of ShopOwner

The March issue includes technical and management content and is free to download.

Now Available – February’s Digital Edition of ShopOwner

February’s issue includes technical and management content and is free to download.

How To Service BMW Tire Monitor Systems

BMW has offered Tire Pressure Monitoring Systems (TPMS) for more than 20 years. These early indirect and direct systems were implemented not to meet the 2007 government mandate but to inform the driver when an expensive Michelin or Bridgestone run-flat tire was deflating. Some 2002 and 2003 models have an indirect system called Flat Tire