Tech Tip: Water Entering Fuse Box on Mercedes-Benz

Tech Tip: Water Entering Fuse Box on Mercedes-Benz

The fuse box (F1) and SAM (N10-1) on 1998 E320 (202/208/210) vehicles are not waterproof, only water-resistant. A strong spray of water can cause moisture to enter these modules and possibly cause corrosion and/or poor contact.

The fuse box (F1) and SAM (N10-1) on 1998 E320 (202/208/210) vehicles are not waterproof, only water-resistant. A strong spray of water can cause moisture to enter these modules and possibly cause corrosion and/or poor contact.

Some symptoms may include wipers or washers operating by themselves, the horn remaining on after releasing the switch and the electric cooling fan remaining on after switching off the ignition.

If water or corrosion is found within the fuse box or SAM, the affected components should be replaced.

Courtesy of IDENTIFIX.

For additional tech tips, visit www.identifix.com.

You May Also Like

Volvo Engine Service

There are many combinations for the Volvo modular engine.

If an engine manages to stay in production for 25 years, it is a testament to the engineering inside. This is the case of the Volvo Modular Series engine that outlasted Ford and was just retired by Geely. The Volvo modular design that can have four, five or six cylinders made its debut in 1990 in the 960 sedan as a six-cylinder and never stopped improving.

Servicing Mercedes-Benz AMG Brakes

Take a look at some of the things you need to know in order to service the brakes on a Mercedes-Benz AMG vehicle.

AUDI Outside Air Temperature Readings

Incorrect readings can be avoided.

Mercedes-Benz ABC Suspensions

The system provides great ride & handling, but it can be complicated to service if you do not have the right training.

Audi TFSI/FSI: Oil Consumption And Carbon Buildup

Technical Service Bulletins can be valuable in helping solve vehicle problems. But sometimes, it takes multiple TSBs to find a pattern failure or the “root cause” of a problem. In the case of the Audi/VW 2.0L Fuel Stratified Injection (FSI) engine introduced in 2006, three problems related to engine carbon and fuel issues are connected

Other Posts

Don’t Miss The April Digital Edition of ShopOwner

The April issue includes technical and management content and is free to download.

Mercedes-Benz: Replacing Bolts at Steering Gear

Work procedures vary slightly for certain platforms. This article outlines the different procedures to follow.

Solving Intermittent Overheating

New cooling systems anticipate and influence changes in coolant temperature.

Now Available – March’s Digital Edition of ShopOwner

The March issue includes technical and management content and is free to download.