TPMS Effectiveness

Communicating The Effectiveness Of TPMS

A good angle to start with may be laying out the consequences of not having a working TPMS.

Communicating the effectiveness of TPMS at the counter can often feel more difficult than, for example, brakes or shocks. Brakes are an obvious safety feature for drivers, while shocks make their ride more comfortable and add to the lifespan of the vehicle. With TPMS, it is a different battle. 

TPMS isn’t immediately seen as a safety feature, or a necessity for that matter. It is seen as a “nice to have” that can be cut from a tight budget pretty easily. Many drivers might compare TPMS to a backup camera or a working sunroof; really nice features to have but they can live without them. It should really be compared to an oil life sensor or a check engine light. Sure, your vehicle will run without them, but how do you know if there is something you should be checking on? How do you know you aren’t adding unnecessary wear and tear to your vehicle, or that you won’t end up stranded on the side of the road?

The concept of TPMS is easy enough for drivers to grasp. It measures their tire pressure and alerts them if their tires need a hit of air. Simple enough. The challenge is getting them to see it as a safety feature and one that will save them money in the long run. A working TPMS is an “investment” in their vehicle.

The challenge is getting customers to see TPMS as a safety feature and one that will save them money in the long run.

A good angle to start with may be laying out the consequences of not having a working TPMS. For example, a tire with pressure that’s too low or too high won’t have its full tread on the road. A tire too high in pressure will lift up the sides and ride more on the center of the tread. A tire too low in pressure will start to lift in the center and ride more on the sides of the tire. This causes:

  • Decreased handling capabilities, as steering becomes less responsive;
  • Increased braking distances, as tires cannot grip the road properly;
  • Decreased tire life due to uneven treadwear, which could mean your customer’s tire investment won’t last as long as it should;
  • Decreased fuel efficiency, as the car has to work harder to move down the road;
  • Increased vehicle emissions due to more fuel consumption; and
  • Increased likelihood of dangerous blowouts, which could cause an accident or put the driver and vehicle’s passengers at risk.

Having a system that warns you of an over- or under-inflated tire can help prevent all of these consequences.

Ultimately, the message to your customer is that maintaining a working TPMS does a lot to benefit them and their passengers. It will indeed increase the safety, performance and efficiency of their vehicle, and it is well worth their investment.

Article courtesy of Tire Review.

You May Also Like

Top 10 Brake Mistakes

Here are the top 10 brake mistakes technicians can make.

1. Not cleaning the brake slides and hardware: Just slapping new pads and abutment clips where the old ones once resided never works. The caliper bracket slides need to be clean and free from rust. Don’t get overly aggressive with the wire brush. Some automakers are using anti-corrosion coatings and surface treatment on the brake caliper bracket lands. If brake cleaner and a nylon brush can’t tackle the deposits, you might be making the corrosion worse by using a wire wheel or file.  

Fine-Tuning Your Wheel Balancing Process

The first step to a smooth ride and well-balanced tire has nothing to do with the balancer.

Drilled and Slotted Rotors

There’s real science behind the location of holes, slots and grooves in today’s brake rotors. Plus, they look great too.

Laying Out Your Shop for ADAS/EV Repairs

With so many vehicles equipped with some form of ADAS, rethinking your electronics layout or plan might be in order.

Air Ride Suspension Diagnostics

The key to understanding the embedded logic of air ride systems is using service information.

Other Posts

How To Service BMW Tire Monitor Systems

BMW has offered Tire Pressure Monitoring Systems (TPMS) for more than 20 years. These early indirect and direct systems were implemented not to meet the 2007 government mandate but to inform the driver when an expensive Michelin or Bridgestone run-flat tire was deflating. Some 2002 and 2003 models have an indirect system called Flat Tire

TPMS Tools and Sensors

Transform TPMS with advanced diagnostics and sensor programming. This video is sponsored by Bosch.

Honda Indirect TPMS Systems

Honda indirect TPMS systems do not have air pressure sensors inside the tires.

Autel’s TS900 TPMS Tool

Beyond TPMS, the Autel TS900 shines as a full-service and maintenance tool.