Mercedes-Benz Check Engine Light: DTCs P2003, P2047, P0810 P0814 Stored in Engine ECU

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
  • aftermarketNews website
  • AutoSuccess website
  • BodyShop Business website
  • Brake & Front End website
  • The Buzz EV News website
  • Counterman website
  • Engine Builder website
  • Fleet Equipment website
  • Motorcycle & Powersports News website
  • Professional Carwashing & Detailing website
  • TechShop website
  • Tire Review website
  • Tomorrow's Tech website
  • Tomorrow's Tech University website
  • Transmission Digest website
  • Underhood Service website
Import Car
Providing technical information and service resources to the import vehicle community
European

Tech Tip: Mercedes-Benz Check Engine Light with DTCs P2003, P2047, P0810 and P0814 Stored in Engine ECU

If you receive customer reports in the model vehicles listed below of the check engine light coming on and codes P2003 (M112, M113, M275), P2047 (M271), P0810 (M272, M273) or P0814 (M272, M273) are stored in the engine control module memory, perform the procedure listed in this Tech Tip.

ImportCar Staff Writers
By ImportCar Staff Writers
Published:

If you receive customer reports in the model vehicles listed below of the check engine light coming on and codes P2003 (M112, M113, M275), P2047 (M271), P0810 (M272, M273) or P0814 (M272, M273) are stored in the engine control module memory, perform the below procedure.

Related Articles

1. Air Pump Relay

Valid for Models: 164.186, 170.465/466, 171.454/456, 199.376, 203.052/054/056/061/064/065/076/ 081/084/087/092/261/264/281/284/764, 209.356/365/372/375/376/456/465/472/475/476, 211.056/065/070/072/076/082/9083/087/090/256/265/276/282/283/287, 215.373/374/375/376/379, 216.371, 219.372, 220.067/170/173/174/175/176/ 179/183/184, 221.171/186, 230.471/472/474/475/ 476/477/479, 251.156/165

This condition may be caused by a malfunctioning air pump relay. When the secondary air pump relay malfunctions, the air pump may be actuated beyond the maximum permissible operating time. This overload may lead to failure of the secondary air injection pump and result in a malfunction in the secondary air injection system. Proceed as follows:

Note: If diagnosis reveals a malfunctioning air injection pump, refer to step 1.2.
fig. 1
1.1. Test the secondary air injection function chain with SDS.

1.2. If the secondary air pump is determined to be defective, remove/replace the secondary air pump and air pump relay (refer to WIS document: AR14.30-P-7251QB).

1.3. If it’s determined that only the relay is defective, replace only the relay and retest the secondary air injection function chain with SDS.

1.4. Program the engine control module.

2. Check Valve for Vacuum Actuation of Air Pump

Valid for Models: 163.154/157/172/174/175, 164.175/186, 171.454/456/473, 199.376, 203.040/052/ 054/056/0361/064/065/076/081/084/ 087/096/261/264/281/284/740/764, 209.076/356/365/375/376/456/465/475/ 476, 211.056/065/070/076/082/083/087/ 256/265/276/282/283/287, 215.373/374/ 375, 219.375/376, 220.067/170/173/174/ 175/183/184, 230.472/474/475, 463.246/ 249/271

Pages: 1 2

You May Also Like

European

VW/Audi PCV Service

The PCV valve regulates the flow of gases from the crankcase.

Andrew Markel
By Andrew Markel
Andrew Markel is an ASE Certified Technician and former service writer, and he brings this practical knowledge to the ImportCar team as director of content. He has more than 20 years on the staff of Import Car.
Published:

Positive crankcase ventilation (PCV) systems have been on just about every vehicle since the late 1960s. The systems route crankcase vapors and droplets into the intake manifold so they are burned in the combustion chamber or catalytic converter. 

The PCV valve uses the vacuum from the intake manifold to regulate the flow of gases from the crankcase. The pintle or ball inside the valve moves in response to the pressure difference between the crankcase and the intake manifold. The valve is typically located between the throttle body and cylinder head on a runner for the intake manifold.

Read Full Article

More European Posts
Volvo Engine Service

There are many combinations for the Volvo modular engine.

By Andrew Markel
Servicing Mercedes-Benz AMG Brakes

Take a look at some of the things you need to know in order to service the brakes on a Mercedes-Benz AMG vehicle.

By ImportCar Staff Writers
AUDI Outside Air Temperature Readings

Incorrect readings can be avoided.

By ImportCar Staff Writers
Mercedes-Benz ABC Suspensions

The system provides great ride & handling, but it can be complicated to service if you do not have the right training.

By Brian Sexton

Other Posts

Don’t Miss The April Digital Edition of ShopOwner

The April issue includes technical and management content and is free to download.

By Doug Kaufman
ZF Expands SACHS CDC Shock Line for U.S., Canada

The release expands ZF’s line by more than 70% reflecting growing demand for advanced damping technology in the aftermarket.

By ImportCar Staff Writers
Philips Announces Xperion 6000 LED Under Hood Work Light

It features a motion detection switch that allows mechanics to turn the light on and off with a wave of their hand.

By ImportCar Staff Writers
Snap-on Announces Latest Software Release

The latest software includes new coverage, guided component tests and features.

By ImportCar Staff Writers