Vehicles:
Ford: 2001-2005 Escape; Escape Hybrid
Mercury: 2005 Mariner
Issue:
When servicing the wheel speed sensors on a 2001-2005 Escape or 2005 Mariner and Escape Hybrid, care must be taken during removal to prevent damage. The wheel speed sensor wire has a body plug attached to it. This plug can be damaged if not removed correctly, such as removal for pinpoint testing. If the body plug is damaged, sensor replacement may be necessary even though the sensor is functional in all other respects.
Action:
When removing the body plug, rotate the plug into a position which allows the use of a small screwdriver to release the tabs on the underside of the body plug. These two tabs are at right angles (directly above and below) to the sensor wire. See Figure 1 and Figure 2 for reference.
Technical service bulletin courtesy of Mitchell 1.
For more information on Mitchell 1 products and services, automotive professionals can log onto the company’s website at www.mitchell1.com.