Ignition Parts Trace Legacy To Yesterday's Innovation (Video)

Ignition Parts Trace Legacy To Yesterday’s Innovation (Video)

Ignition used to be a problem, but innovation intervened. This video is presented by The Group Training Academy.

More than 130 years ago, during the automotive industry’s infancy, Carl Benz – one of the key players in developing the reliable gasoline engine – called ignition “the problem of problems.” That was true until 1887 when Robert Bosch designed a groundbreaking ignition system, the magneto ignition system. With the further patenting of the Bosch High Voltage Ignition system and the simultaneous development of the accompanying spark plug in the early 1900s, reliable starts became the expectation for vehicle manufacturers and drivers around the world.

Today, the average vehicle powertrain consists of numerous components that can trace their legacy back to those early developments.

The components in a gasoline powertrain include spark plugs and ignition coils, of course, but also include fuel pumps and injectors, electronic throttle bodies and a wide assortment of sensors, including manifold pressure and Mass Air Flow sensors, knock sensors, cam and crankshaft position sensors, oxygen sensors and pressure and temperature sensors.

The diesel portfolio is equally diverse, from glow plugs, pumps, fuel rails and injectors to Urea tanks and dosing modules and other sensors as well.

From the creation of innovative ignition and fuel injection technology to inventive sensors for more efficient driving, the key to leadership in this complex aftermarket industry is an ability to build trust with Original Equipment – or OE – manufacturers by building products that meet OE requirements. Bosch has established this confidence by providing aftermarket parts that provide original form, fit and function of the original parts.

What does FUNCTION mean? In short it can be characterized by having 

OE PERFORMANCE – the part performs functionally as the original part did;

OE RELIABILITY – the part performs as well as the original part did, regardless of the conditions; and 

OE DURABILITY – the part lasts as long as the original part did.

Sounds comprehensive, right?

But with Bosch Powertrain Solutions, you get more than technology – you secure a consulting partner with industry expertise and an extensive array of services to help you optimize your shop operations. You’ll benefit from the eXtra Loyalty Program that rewards shops for buying products they need to drive their businesses; take reassurance in warranty coverage on all powertrain parts; and rely on OE specifications for complete repairs with no comebacks.

Whether you’re more interested in quality parts but don’t know what brand to choose, need to increase profit margins and save money or are interested in learning more about the technical features of today’s gas and diesel powertrain components, check out your Bosch powertrain solutions supplier. With more than a century of expertise serving hundreds of millions of vehicles in operation, you can be confident that your shop’s – and your customers’ – needs will be met.

This video is presented by The Group Training Academy.

You May Also Like

Wheel Bearing Shortcuts

When you’re installing a wheel speed sensor on a hub unit, never ever remove it from the original unit. Sponsored by Auto Value and Bumper to Bumper.

Hey, I got a great shortcut for you. If you're working on wheel hubs, if you have one where you're dealing with a harness for the wheel speed sensor that may be behind a fender liner, has all these horrible Christmas trees on it to get in and out from behind areas that you've never seen, well, you can just simply take the old out and then put it in the new and get rid of the new harness. Do not ever use the shortcut. It is a bad thing to do because you are destroying the calibrated air gap that was done at the factory, and this is very precise, done with computers. By removing the wheel speed sensor from one and putting it in another, you've just changed everything completely and you're gonna cause yourself a comeback. Do you wanna know why? Well, it's gonna cause an erratic wheel speed sensor code or issues with the air gap.

Maverick Tire Changer: Handling Large Custom Wheels

Large, custom 4×4 wheels are all the rage, and Hunter’s Maverick tire changer makes handling them a breeze.

Introduction to the Maverick Tire Changer

Joe Keene speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.

Schaeffler and Sustainability with Jerry Conroy

Conroy shares insights into his career trajectory, the evolving landscape of the company’s aftermarket operations, and its commitment to innovation and sustainability.

Flushing the Brake Fluid is Critical on Every Brake Repair

Making sure the brake fluid is the correct quality is critical. Sponsored by Auto Value and Bumper to Bumper.

Other Posts

Selecting the Right Oil for your Customers Engine

Learn how to educate customers on the importance of OEM specifications and premium lubrication for their vehicles’ maintenance needs.

At the Intersection of Tradition and Innovation with Grace Hovis

Grace Hovis’s journey in Hovis Auto & Truck Supply blends tradition with digital innovation in the automotive aftermarket industry.

Turbocharger Maintenance ft. Rein TechSelect Turbo Kits

Learn about common challenges with turbocharger maintenance and how Rein TechSelect Turbo Kitsmake the repair process easier for technicians.

The Standard® Advantage

Standard® knows that what comes out of a repair is directly dependent upon what goes into the box. This video is sponsored by Standard®.