One Simple Question Will Boost Customer Satisfaction (Video) One Simple Question Will Increase Customer Satisfaction

One Simple Question Will Boost Customer Satisfaction (Video)

Ask if the vehicle has other issues. This video is presented by Auto Value and Bumper to Bumper.

Did you know there’s one simple question you can ask that will benefit both your customer and your shop every time? That’s right – it’s a few words that will translate into higher customer satisfaction rates and an increase in work on each vehicle – without seeming pushy or high pressure.

“Is there anything your car is doing that you haven’t thought to mention?”

Two things that have beautiful synergy are the customer’s desire to have their car in the shop as few times as possible and the need for billable hours at your shop. Ask any shop owner what they sell and you’ll usually hear “We sell customer service!” If that’s the case, then why don’t we sell more of needed repair and maintenance work?

According to the Car Care Council, for every 1 dollar a customer spends in repair and maintenance there are 7 dollars in work that need to be performed on the vehicle. In a lot of cases, somewhere in the sales process the shops put a higher value on the customer’s money than their time.

Other than value-conscious customers, our prime customers value their time over their money.So how can you bridge that gap at your shop? When that one smple question is asked of your customer during the drop-off process, it can be the source of a lot of additional work.

Ask it right near the end of the writeup process – then wait for them to speak! You’d be surprised at how much additional work will be requested as a result of that question. Here’s why.

In most cases, a customer will only come in when a noise or other concern has gotten bad enough to cause them to come to your shop. Remember, time is the most important thing and life is pretty busy for most people. So they wait until it’s critical or intolerable. It’s not that they don’t want to have other things looked at, it’s because the primary concern is what’s gotten them to bring the car to you and in a lot of cases, the other items just aren’t top-of-mind.

Hockey great Wayne Gretzky said “You miss 100% of the shots you don’t take.”

Using that one simple question has helped me score additional service work at my shop, so consider adding this question to your interview process. You’ll be glad you did.

This video is presented by Auto Value and Bumper To Bumper.

You May Also Like

Wheel Bearing Shortcuts

When you’re installing a wheel speed sensor on a hub unit, never ever remove it from the original unit. Sponsored by Auto Value and Bumper to Bumper.

Hey, I got a great shortcut for you. If you're working on wheel hubs, if you have one where you're dealing with a harness for the wheel speed sensor that may be behind a fender liner, has all these horrible Christmas trees on it to get in and out from behind areas that you've never seen, well, you can just simply take the old out and then put it in the new and get rid of the new harness. Do not ever use the shortcut. It is a bad thing to do because you are destroying the calibrated air gap that was done at the factory, and this is very precise, done with computers. By removing the wheel speed sensor from one and putting it in another, you've just changed everything completely and you're gonna cause yourself a comeback. Do you wanna know why? Well, it's gonna cause an erratic wheel speed sensor code or issues with the air gap.

Maverick Tire Changer: Handling Large Custom Wheels

Large, custom 4×4 wheels are all the rage, and Hunter’s Maverick tire changer makes handling them a breeze.

Introduction to the Maverick Tire Changer

Joe Keene speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.

Schaeffler and Sustainability with Jerry Conroy

Conroy shares insights into his career trajectory, the evolving landscape of the company’s aftermarket operations, and its commitment to innovation and sustainability.

Flushing the Brake Fluid is Critical on Every Brake Repair

Making sure the brake fluid is the correct quality is critical. Sponsored by Auto Value and Bumper to Bumper.

Other Posts

Selecting the Right Oil for your Customers Engine

Learn how to educate customers on the importance of OEM specifications and premium lubrication for their vehicles’ maintenance needs.

At the Intersection of Tradition and Innovation with Grace Hovis

Grace Hovis’s journey in Hovis Auto & Truck Supply blends tradition with digital innovation in the automotive aftermarket industry.

Turbocharger Maintenance ft. Rein TechSelect Turbo Kits

Learn about common challenges with turbocharger maintenance and how Rein TechSelect Turbo Kitsmake the repair process easier for technicians.

The Standard® Advantage

Standard® knows that what comes out of a repair is directly dependent upon what goes into the box. This video is sponsored by Standard®.