Tech Tip: Educating Drivers About Cabin Air Filters

Tech Tip: Educating Drivers About Cabin Air Filters

Most cabin air filters are flat panel filters, but some have unusual shapes so they will fit the HVAC inlet duct. Some may also be in two sections to make replacement easier. These filters can trap pollen, dust, smoke and other pollutants that would otherwise enter the vehicle and possibly irritate the nose and lungs of the driver and passengers.

Cabin filters have been used on some on Audis and other European makes since the mid-1980s, and on a growing list of domestic makes since the mid-1990s. Today, close to 80 percent of all new vehicles have one of these filters — or a place where one can be installed. But it’s often called the “hidden filter” because many motorists don’t realize their vehicle has a separate air filter for the passenger compartment. Cabin air filters are put there for the health of the vehicle’s occupants.

The best way to tell if a vehicle has a cabin air filter, or factory provisions for installing a cabin air filter, is to check the vehicle owner’s manual. Also check the catalog listings for cabin air filters by year, make and model.

If a vehicle has a cabin air filter, it will usually be located at the base of the windshield (open the hood and look in the cowl area for a small access door), or somewhere behind the glove box in the HVAC assembly (look under the dash for an access door). On some vehicles, the glove box has to be removed to access and replace the filter.

Most cabin air filters are flat panel filters, but some have unusual shapes so they will fit the HVAC inlet duct. Some may also be in two sections to make replacement easier. These filters can trap pollen, dust, smoke and other pollutants that would otherwise enter the vehicle and possibly irritate the nose and lungs of the driver and passengers.

Many motorists are not aware their vehicles have these filters. So ask your customers if they have checked their cabin air filters lately. It may stimulate some conversation as well as filter sales.

The service life of a cabin air filter depends on two things: the type of filter (dust or combination dust/odor) and operating conditions. A filter on a vehicle that is driven frequently on gravel roads will not have the life of a filter in a vehicle that is driven in a cleaner environment. Exposure to heavy traffic (especially diesel fumes) and urban pollution can also shorten the life of a combination dust/odor filter.

As a general rule, most cabin air filters should be changed every 20,000 to 30,000 miles — or more often depending on the size and capacity of the filter. Many vehicle manufacturers recommend replacing the filters every 12,000 to 15,000 miles or once a year. Refer to the vehicle owner’s manual for specific service interval recommendations.

Most of these filters are highly efficient and have electrostatically charged fibers that do an excellent job of trapping even the smallest particles (down to 0.3 microns!). Most cabin air filters will stop 100 percent of all particles that are 3 microns or larger in size, and 95 to 99 percent of particles in the 1- to 3-micron-size range.

Some cabin air filters also trap odors, and are called “combination” filters. These filters have an extra layer of activated carbon that reacts with odors and other airborne pollutants to neutralize them before they become objectionable. The filters can even reduce the levels of carbon monoxide and oxides of nitrogen from the exhaust of other vehicles.

The levels of these pollutants can be quite high in heavy stop-and-go traffic, and it’s not unusual for the concentration of these pollutants to be several times higher inside a vehicle than outside. Studies have shown that driver reaction times are slower when the driver is being affected by poor air quality.

You May Also Like

Philips Announces Xperion 6000 LED Under Hood Work Light

It features a motion detection switch that allows mechanics to turn the light on and off with a wave of their hand.

Lumileds announced the Philips Xperion 6000 Under Hood LED Work Light, which it says is designed to help make auto service professionals more productive. This advanced LED work light features a motion detection switch that allows mechanics to turn the light on and off with a wave of their hand, so they can operate it without putting down tools or interrupting their work, the company said.

Snap-on Announces Latest Software Release

The latest software includes new coverage, guided component tests and features.

Continental Tire Opens Retread Solutions Center in South Carolina

The company said it hopes to uncover new improvements and technologies to innovate the retread process.

Philips Announces GoPure GP5212 Automotive Air Purifier

It uses a 3-layer filter to deliver cleaner, healthier, fresher air on the go, Lumileds said.

AACF Launches 65th Anniversary Fundraising Initiative

The campaign aims to raise $65,000 through 1,000 donations of $65 each.

Other Posts

Don’t Miss The April Digital Edition of ShopOwner

The April issue includes technical and management content and is free to download.

Standard Motor Products Announces 123 New Numbers

The release provides new coverage in 53 distinct product categories and 47 part numbers for 2023 and 2024 model-year vehicles.

BendPak Founder Don Henthorn Passes Away

Grew company from small machine shop to global leader in car lifts and garage equipment.

Mercedes-Benz: Replacing Bolts at Steering Gear

Work procedures vary slightly for certain platforms. This article outlines the different procedures to follow.