Tech Feature: 2010 Buick LaCrosse Brake Service

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
  • aftermarketNews website
  • AutoSuccess website
  • BodyShop Business website
  • Brake & Front End website
  • The Buzz EV News website
  • Counterman website
  • Engine Builder website
  • Fleet Equipment website
  • Motorcycle & Powersports News website
  • Professional Carwashing & Detailing website
  • TechShop website
  • Tire Review website
  • Tomorrow's Tech website
  • Tomorrow's Tech University website
  • Transmission Digest website
  • Underhood Service website
Import Car
Providing technical information and service resources to the import vehicle community
European

Tech Feature: 2010 Buick LaCrosse Brake Service

The 2010 Buick LaCrosse is built on the Epsilon II platform that is shared with the Saab 9-5 and other soon-to-be-named vehicles. While you may not see this vehicle in your bays for a while, it is a great example of how the common brake job will stay the same and how it will change in the future.

Andrew Markel
By Andrew Markel
Andrew Markel is an ASE Certified Technician and former service writer, and he brings this practical knowledge to the ImportCar team as director of content. He has more than 20 years on the staff of Import Car.
Published:

It is not that often I get a chance to examine a brake system that has less than 3,000 miles on it. On the lift, it is easy to see that the engineers put a lot of time and effort into the design of the suspension and undercar components. The brake system is very serviceable, except for the ABS modulator that is mounted behind and below the engine.

Related Articles

The LaCrosse is equipped with an electric parking brake. The switch is in the center console. The switch will only work if your foot is on the brake pedal. By not having a handle, e-brake turns are now impossible, but it does save space. The good news is that it adjusts itself.

The Buick LaCrosse has an electric parking brake control module that is mounted in the left rear wheel well. The unit has an electric motor, apply actuator, release actuator and temperature sensor. The electric parking brake control module also contains the electronic controls for applying and releasing the parking brake when commanded by the electric parking brake switch. 

the front brakes on the lacrosse use single-piston calipers. gm has been using a high-quality plating so their calipers look better over time.

the guide pin bolts on the front brakes have a torque spec of 27 n·m (20 ft/lbs). gm advises that impact tools should not be used to remove these bolts. the flats on the pins use a 17 mm open-ended wrench. some wrenches might not fit.

the front brake pads have a single clip-on shim on the inside pad to prevent noise and to create a heat barrier. the shim is made of a brass-like material. it is recommended that it is replaced during pad replacement.

the front and rear pistons are steel. to reset the pistons, gm recommends to have the the engine off and gradually apply the brake pedal to approximately 2/3 of its travel distance. slowly release the brake pedal and wait 15 seconds, then repeat until a firm pedal is achieved.

the front wheel-speed sensors are located in the knuckles. they are active sensors.

the rear calipers have the parking brake mechanism built-in. the inspection hole for the inboard pad shows only the last 4 mm of friction material.

to release the parking brake, turn the ignition switch to on, press the brake pedal, and push down momentarily on the electric parking brake switch. when the parking brake is released, the red brake light turns off. if the red park brake light is flashing on the dash, the electric parking brake may be only partially applied or released, or there is a problem with the electric parking brake. the center display will read “service park brake.” the system on the lacrosse does not automatically engage when the vehicle is parked.

turn the rear brake piston to retract the piston. go the opposite way the parking park lever pulls. the torque spec for the caliper pin bolts is a torque spec of 27 n·m (20 ft/lbs).

in case of insufficient electrical power, the electric parking brake cannot be applied or released. if a vehicle is dropped off to your shop with a dead battery and the parking brake on, you might have to disengage the rear cables.

the lacrosse comes with a keyless ignition system. it is a good idea to keep the key away from the vehicle while servicing the brakes or any underhood work.

TPMS? YES! This is the new-style valve stem mounted sensor. The valve stem looks like a normal non-TPMS stem, but the sensor is attached to the backside of the stem with a self-tapping screw.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You May Also Like

European

Timing BMW VANOS N53 And N54 

To service them, you will need the appropriate toolset to lock the crank and camshaft.

Andrew Markel
By Andrew Markel
Andrew Markel is an ASE Certified Technician and former service writer, and he brings this practical knowledge to the ImportCar team as director of content. He has more than 20 years on the staff of Import Car.
Published:

The BMW N53 (naturally aspired) and N54 (turbocharged) engines were among the first BMW engines to come with variable valve timing on the intake and exhaust camshafts. The N53 and N54 straight-six have unfairly earned a bad reputation for reliability with technicians due to timing chain and variable valve timing problems. The reputation comes from owners not keeping up with oil changes and it is difficult to check engine timing.

Read Full Article

More European Posts
VW/Audi PCV Service

The PCV valve regulates the flow of gases from the crankcase.

By Andrew Markel
Volvo Engine Service

There are many combinations for the Volvo modular engine.

By Andrew Markel
Servicing Mercedes-Benz AMG Brakes

Take a look at some of the things you need to know in order to service the brakes on a Mercedes-Benz AMG vehicle.

By ImportCar Staff Writers
AUDI Outside Air Temperature Readings

Incorrect readings can be avoided.

By ImportCar Staff Writers

Other Posts

BCA Bearings Unveils 2024 Endless Summer Promotion

The Endless Summer promotion runs from May 1 through June 30, 2024.

By Nadine Battah
ZF Expands SACHS CDC Shock Line for U.S., Canada

The release expands ZF’s line by more than 70% reflecting growing demand for advanced damping technology in the aftermarket.

By ImportCar Staff Writers
Philips Announces Xperion 6000 LED Under Hood Work Light

It features a motion detection switch that allows mechanics to turn the light on and off with a wave of their hand.

By ImportCar Staff Writers
Snap-on Announces Latest Software Release

The latest software includes new coverage, guided component tests and features.

By ImportCar Staff Writers