Selling Services: Anti-Seize & Studs

Selling Services: Anti-Seize & Studs

Last month I received a great letter from one of our readers. He was absolutely livid about the story “Double Hit” in our February issue. Ed from the Cherokee Garage in Beckwourth, CA, pointed out several incorrect items in the article.

In the article, it was advised that a light coating of anti-seize could be applied to the wheel studs. We were wrong. I admit it. But, admitting that you are wrong is just the first step in making it up to the reader.

The next step is to learn from the mistake. This learning process not only helped me to solve the problem, but it also uncovered other, more serious problems.

If you apply any friction modifying substance, like oil or anti-seize, to the wheel stud threads, it is going to change the measured torque values. With less friction on the threads, the torque values increase. So, when you tighten a wheel to 85 ft/lbs, it may actually be torqued at 95 ft/lbs (this includes torque wrenches and sticks). The increase in force will mean that the studs will stretch under the increased torque. This stretching can lead to metal fatigue, changes in thread geometry and the possible failure.

This can be a very significant problem, and I apologize for letting it slip. But, in doing some research, I encountered another aspect of anti-seize on wheel studs that can be an even greater problem.

The Bigger Problem
I ran across a “penny pincher” consumer website for misers, cheapskates and skinflints. Aside from the tip about keeping a phone book in your car so you can check prices for the best tow truck rate, the website had a tip about anti-seize and lug nuts. The tip was written by a non-credited source and it advised drivers to “spend an afternoon” applying anti-seize to all the studs to make it easier to remove the lug nuts.

If you encounter one of these vehicles with anti-seize on the wheel studs, be very careful. Take time to explain to the driver why anti-seize is bad and how it can cause problems. Also, advise them that there is a potential for failure during normal service. You should also put it on the repair order.

Is there a right way to use lubricants around the wheel? Yes, but it has to be a high-temperature lubricant used only in a very light coating. First, a high-temperature lubricant can be used where the hub goes through the center of the wheel. Many vehicles use the hub to center the wheel. These “hub-centric” designs can benefit from a very light coating.

On some conical lug nuts, you can put a light coating on the seating surfaces of the cone, while avoiding any contamination with the threads. This coating can prevent corrosion. Thank you Ed, for setting me straight.

You May Also Like

OEC Integrates RepairLink, PartsTech Services

Through the integration of RepairLink, PartsTech adds nearly 9,000 OE dealers as well as OE promotional programs.

OEConnection LLC (OEC) announced that it is integrating its PartsTech and RepairLink services.

According to OEC, PartsTech currently connects shops to 240-plus aftermarket suppliers, 60-plus tire suppliers, and distributor-sponsored promotional programs. The integration of RepairLink will enable PartsTech to add nearly 9,000 OE dealers across all 50 states and OE-sponsored promotional programs from 14-plus OE brands. Every major part type is now available in a single search, the company says.

Servicing Volkswagen Electronic Parking Brakes

You will need a scan tool with the proper software for the parking brake system to retract the calipers, adjust and perform diagnostics. There are no shortcuts.

Volkswagen-Electronic-Parking-Brake
Timing BMW VANOS N53 And N54 

To service them, you will need the appropriate toolset to lock the crank and camshaft.

Audi Matrix LED Headlights

The system reacts precisely to other cars, which it recognizes using a camera, and always illuminates the road brightly.

Mini Cooper Clutch Replacement

Mike Greer’s advice: Don’t turn away an all-wheel Mini Cooper clutch replacement job just because it seems too complicated.

Other Posts
How Regenerative Braking Changes Repair and Inspection

Brake condition assessments should account for both friction material wear and the effects of limited brake usage.

Autel Integrates Alldata Repair With MaxiSYS Tablets

The integration became available Nov. 1. Existing Alldata Repair subscribers can access it using their current accounts.

Dayco Extends Warranty on Serpentine Belt Kit Line

Dayco announced that it is offering a new five-year, 60,000-mile warranty protection plan on its light-duty serpentine belt kit portfolio.

Worldpac to Open Automated Distribution Center

The 413,000-square-foot facility in Forest Park, Georgia will begin operations in 2027.