Porsche Tech Tip: Emergency Unlocking of Luggage Compartment Lid when Battery is Dead

Porsche Tech Tip: Emergency Unlocking of Luggage Compartment Lid when Battery is Dead

Many vehicles have their batteries in non-standard locations due to packaging constraints. For Porsche, the Boxster and 911 have their battery in the forward luggage compartment. While this wouldn’t normally be a problem, the newer models have only an electric release for the luggage lid and no hidden cable release as a backup. If the battery is dead, how do you actually get in there to service the battery?

Many vehicles have their batteries in non-standard locations due to packaging constraints. For Porsche, the Boxster and 911 have their battery in the forward luggage compartment. While this wouldn’t normally be a problem, the newer models have only an electric release for the luggage lid and no hidden cable release as a backup. If the battery is dead, how do you actually get in there to service the battery? Porsche provides a method to hook up auxiliary power to operate the latch. The following procedure is for the 2003-’04 Boxster, but other models are similar.

Service Procedure:
1. Use the key to unlock the vehicle at the door lock. Leave the key in the door lock.

2. Remove the plastic cover over the fuse box (located in left kick panel). See Fig. 1.

3. Pull out the positive terminal (See A, Fig. 1) in the fuse box.

4. Use a jumper cable to connect the positive terminal of the donor battery to positive terminal A in the fuse box.

Note: If the vehicle was locked, the alarm horn will sound when the negative cable is connected.

5. Use the second jumper cable to connect the terminal of the donor battery to the door latch striker (B in illustration).

6. Switch off the alarm system by locking and unlocking at the door lock.

7. Unlock the luggage compartment lid with the switch.

8. Disconnect the negative cable first, then the positive cable.

9. Push the positive terminal (See A, Fig. 1) into the fuse box and replace the fuse box cover.

Note: The engine cannot be jump-started with this method. Open the compartment lid first and then jump-start vehicle as recommended by manufacturer.

Written by Nick Taylor, administrator, Mitchell 1 OnDemand5.com.

For additional information, visit www.mitchell1.com.

You May Also Like

Servicing Mercedes-Benz AMG Brakes

Take a look at some of the things you need to know in order to service the brakes on a Mercedes-Benz AMG vehicle.

AMG is the performance line of Mercedes-Benz vehicles, just like Nismo is to Nissan, and M is to BMW. I can tell you from experience that there are many exciting vehicles wearing that AMG badge. They’re powerful, luxurious and they make a sound unlike any other.

But, just like all motor vehicles, they require service from time to time. Slowing the vehicle down from high speeds takes a toll on the brakes, wearing them down over time. So, today let’s take a look at some of the things you need to know in order to service the brakes on a Mercedes-Benz AMG vehicle.

AUDI Outside Air Temperature Readings

Incorrect readings can be avoided.

Mercedes-Benz ABC Suspensions

The system provides great ride & handling, but it can be complicated to service if you do not have the right training.

Audi TFSI/FSI: Oil Consumption And Carbon Buildup

Technical Service Bulletins can be valuable in helping solve vehicle problems. But sometimes, it takes multiple TSBs to find a pattern failure or the “root cause” of a problem. In the case of the Audi/VW 2.0L Fuel Stratified Injection (FSI) engine introduced in 2006, three problems related to engine carbon and fuel issues are connected

BMW Headlight Service

Taking a guess can get very pricey if you can’t return the part. 

Other Posts

Mercedes-Benz: Replacing Bolts at Steering Gear

Work procedures vary slightly for certain platforms. This article outlines the different procedures to follow.

Solving Intermittent Overheating

New cooling systems anticipate and influence changes in coolant temperature.

Today’s Fuel Pressure Diagnostics

Direct injection pressure is measured with sensors, and the signals are used to determine pump speed and/or volume.

ADAS Calibration Tips

Here are 10 tips to follow during ADAS Calibration.