Rotor Debate: Resurface or Replace?
More often than not, many rotors today are being replaced when the brakes are relined – and some motorists are complaining that new rotors really aren’t necessary. Resurfacing can usually restore the friction surface on worn rotors to like-new condition, unless a rotor is worn down too far to be safely resurfaced or has cracks,
Foreign Affairs: Can Your Shop Handle OBD Multiplexing?
“CAN” is the new buzz word in automobile diagnostics. It stands for Controller Area Network and is a protocol for onboard diagnostics and scan tools. CAN is a high-speed data link that provides more information at a faster rate for better communication between onboard electronics and external diagnostic equipment. Many manufacturers have already started incorporating
Delphi Launches Three New Technologies to Help Land Rover Achieve the Highest Standards of Handling and Comfort
Three new technologies from Delphi Corp. are helping the new Range Rover Sport achieve levels of dynamic performance and comfort that are widely regarded as setting new standards for a high-performance SUV.
Friction Fundamentals
A brake, according to the dictionary, is a device for arresting the motion of a wheel or vehicle. The original brake, like the original wheel, was invented before history was accurately recorded, but we know from pictures drawn by ancient Phoenicians and Egyptians that it is one of the oldest of mechanical devices. For thousands
Rotor Debate: Replace, Discard or Machine?
More often than not, many rotors today are being replaced when the brakes are relined – and some motorists are complaining that new rotors aren’t really necessary. Unless a rotor is worn down too far to be safely resurfaced or has cracks, deep grooves, severe rusting, hard spots or other structural defects, resurfacing can usually
Directions
Edward Sunkin has been the editor of Underhood Service since April of 1999. He has been a member of the Babcox family of automotive aftermarket publications beginning in December 1994, when he joined the jobber/parts specialist magazine Counterman as an associate editor. Edward also spent three years as managing editor Engine Builder, learning about the
Mastering Mercedes Multiplexing
“CAN” is the new buzz word in automobile diagnostics. It stands for Controller Area Network and is a protocol for onboard diagnostics and scan tools. CAN is a high-speed data link that provides more information at a faster rate for better communication between onboard electronics and external diagnostic equipment. Many manufacturers have already started incorporating
OHC Engine Repairs and Service on Chrysler’s 3.5L V6
Chrysler’s 24-valve 3.5L single overhead cam V6 engine was introduced back in 1993 in their LH platform cars (Chrysler Concorde, Dodge Intrepid and Eagle Vision). Since then it has been used in a variety of Chrysler models. The 3.5L engine is an even-firing power plant with aluminum cylinder heads, a single camshaft in each cylinder
Chrysler Neon 2.0L
When Chrysler introduced their new Neon models back in 1995 under the Dodge and Plymouth nameplates, they said they were launching a new generation of “fun-to-drive” entry-level cars that would appeal to a wide range of people. Everything was new about the Neon: a brand new body, a brand new chassis and two new engines,