Honda CR-V 2019-2022 Strut Installation (VIDEO)

Honda CR-V Strut Installation (VIDEO)

This video covers installation procedures on 2019 CR-V models. This video is sponsored by PRT.

CC:

PRT the first to market choice for complete strut assemblies for one of the best selling SUVs on the national scene, the 2019 to 2022 Honda CR-V.

The CR-V is one of the best selling vehicles in the United States. The complete strut assemblies apply to the front right and front left positions and fit the EX, EXL LX and touring trim levels. This video covers installation procedures on 2019 models.

First, remove the bolt that secures the brake line to strut Next, unfastened the bolt that holds the wheel speed sensor to the knuckle. Detached the wheel speed sensor harness from the strut, move the sensor and harness out of the way. Remove the caliper bracket bolts and hang the caliper bracket off to the side. Mark the rotor and stud so the rotor is indexed to the flange. Remove retaining screw. Disconnect the upper stabilizer link from the strut. Remove the axle nut, a new nut should be used during installation. You might need to force the axle from the wheel hub, do not hammer the axle out. Extract the cotter pin from the outer tie rod stud and remove the nut. Unfastened the pinch bolt that holds the strut on the knuckle. Remove the three nuts that secure the ball joint to the lower control arm. Pull the control arm down. Under the hood unfasten the three nuts that hold the upper strut mount to the body. You can now remove the old strut. On the bench, separate the old strut from the knuckle. Remove the wheel speed sensor bracket from the old strut.

The PRT unit matches the original unit for fit form and function. The new unit spring matches the original not only for the application, but drivetrain and trim level. This ensures the ride height is the same as the original. Insert the new strut into the knuckle and tighten the pinch bolt to 69 foot pounds. Maneuver the strut into the wheel well then attach the upper strut mount bolts. Tighten the bolts to 55 foot pounds. Slide the axle into the wheel bearing hub unit, pull the lower control arm down and tighten the studs into the holes. Tighten the nuts to 47 foot pounds. Install the outer tie rod onto the knuckle. Tighten the nut to 40 foot pounds and install a new cotter pin. Insert the lower stabilizer bar link into the tab on the strut. Tighten the nut to 47 foot pounds. Install the brake rotor and secure with a screw. Reinstall the brake caliper, tighten to 100 foot pounds. Using a new axle nut, tighten the nut to 242 foot pounds. Remember to stake the nut.

Next, affix the break hose bracket and tighten to 22 foot pounds. Insert the wheel speed sensor onto the knuckle. Tighten the bolt to only seven foot pounds. Install the wheel and torque to 80 foot pounds. Performance alignment on the vehicle.

PRT or performance ride technology shares its heritage with one of the largest manufacturers of shocks, struts and complete strut assemblies in the world. PRT products are produced and tested under the strictest OE quality processes required by leading automakers in five modern and fully automated plants using the latest technology available. With more than 27 years of expertise in ride control and suspension product manufacturing, conducting business, and more than 67 countries worldwide with a strong presence in OE and OES developments, PRT is a leading presence in the global aftermarket business. Quality, complete coverage, advanced features and built in profit potential for customers are synonymous with PRT. Performance ride technology is in our DNA.

This video is sponsored by PRT.

You May Also Like

Rust and Corrosion Preventive Oil (VIDEO)

Your tools and equipment need to be protected from rust. This video is sponsored by Lubegard.

Welcome to Rustgard, rust and corrosion preventive oil by Lubegard, product overview.

Rust and corrosion can destroy tools and equipment, and it only takes a little moisture to trigger rust. Whether in your garage, shed, or shop, temperature and humidity levels are constantly fluctuating and your tools and equipment need to be protected.

Auto Pros Team Visits Hybrid Shop of The Carolinas

Auto Pros on the Road puts the Babcox team into shops across the USA. This episode is sponsored by Autolite.

Ford F-250 Shock Replacement (VIDEO)

Follow along the step by step installation process of shocks on a Ford F-250. This video is sponsored by PRT.

2007-2021 Toyota Tundra Strut Replacement (VIDEO)

Follow along the step by step installation process for struts on 2007-2021 Toyota Tundras. This video is sponsored by PRT.

AMN Drivetime: MEMA Leaders Chat About The Future

MEMA leaders sat down with Bill Babcox to share a few updates on the realignment of the association announced in November.

Other Posts

Honda Oil System Inspection

The leading cause of low oil pressure-related complaints with Honda vehicles is the oil level.

Nissan Suspension Restoration

The shock or strut controls how the energy in the spring is absorbed and compressed.

Creating Parts: The Manufacturing Process (Video)

Creating parts takes many steps worth of work. Sponsored by AP Emissions.

Direct Fit Catalytic Converters Features and Benefits

Four qualities stand out the most when looking at these catalytic converters. Sponsored by AP Emissions.