GM Tech Tip: Growl Noise Caused By Axle Nuts

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
  • aftermarketNews website
  • AutoSuccess website
  • BodyShop Business website
  • Brake & Front End website
  • The Buzz EV News website
  • Counterman website
  • Engine Builder website
  • Fleet Equipment website
  • Motorcycle & Powersports News website
  • Professional Carwashing & Detailing website
  • TechShop website
  • Tire Review website
  • Tomorrow's Tech website
  • Tomorrow's Tech University website
  • Transmission Digest website
  • Underhood Service website
Import Car
Providing technical information and service resources to the import vehicle community
European

GM Tech Tip: Growl Noise Caused By Axle Nuts

To diagnosis the noise, re-torque the existing front axle shaft nut to 162 ft/lbs and test drive the vehicle. If the noise is eliminated, replace both front axle nuts with the updated part (P/N: 10257766). On vehicles equipped with the police package, add an additional Nord-Lock.

ImportCar Staff Writers
By ImportCar Staff Writers
Published:
Models: 
2006-2013 Chevrolet Impala
2014 Chevrolet Impala Limited
 
Problem: A driver may report that a growling noise is coming from the front of the vehicle. 
 
Cause: The condition may be caused by a loss of pre-load on the front wheel bearings due to the axle nut.
 
Correction: To diagnosis the noise, re-torque the existing front axle shaft nut to 162 ft/lbs and test drive the vehicle. If the noise is eliminated, replace both front axle nuts with the updated part (P/N: 10257766). On vehicles equipped with the police package, add an additional Nord-Lock. 
Related Articles

You May Also Like

European

Volvo Engine Service

There are many combinations for the Volvo modular engine.

Andrew Markel
By Andrew Markel
Andrew Markel is an ASE Certified Technician and former service writer, and he brings this practical knowledge to the ImportCar team as director of content. He has more than 20 years on the staff of Import Car.
Published:

If an engine manages to stay in production for 25 years, it is a testament to the engineering inside. This is the case of the Volvo Modular Series engine that outlasted Ford and was just retired by Geely. The Volvo modular design that can have four, five or six cylinders made its debut in 1990 in the 960 sedan as a six-cylinder and never stopped improving.

Read Full Article

More European Posts
Servicing Mercedes-Benz AMG Brakes

Take a look at some of the things you need to know in order to service the brakes on a Mercedes-Benz AMG vehicle.

By ImportCar Staff Writers
AUDI Outside Air Temperature Readings

Incorrect readings can be avoided.

By ImportCar Staff Writers
Mercedes-Benz ABC Suspensions

The system provides great ride & handling, but it can be complicated to service if you do not have the right training.

By Brian Sexton
Audi TFSI/FSI: Oil Consumption And Carbon Buildup

Technical Service Bulletins can be valuable in helping solve vehicle problems. But sometimes, it takes multiple TSBs to find a pattern failure or the “root cause” of a problem. In the case of the Audi/VW 2.0L Fuel Stratified Injection (FSI) engine introduced in 2006, three problems related to engine carbon and fuel issues are connected

By Andrew Markel

Other Posts

Mercedes-Benz: Replacing Bolts at Steering Gear

Work procedures vary slightly for certain platforms. This article outlines the different procedures to follow.

By ImportCar Staff Writers
Solving Intermittent Overheating

New cooling systems anticipate and influence changes in coolant temperature.

By Andrew Markel
Today’s Fuel Pressure Diagnostics

Direct injection pressure is measured with sensors, and the signals are used to determine pump speed and/or volume.

By ImportCar Staff Writers
ADAS Calibration Tips

Here are 10 tips to follow during ADAS Calibration.

By Andrew Markel