ADVICS Tech Tip: Proper Master Cylinder Installation
Fluid leakage and improper hydraulic pressure may cause brake failure.
No Pedal Condition With New Master Cylinder Installation
The condition can be caused by the piston sticking in the bore of the master cylinder during the bleeding process.
Master Cylinders Need Periodic Inspections
Dual master cylinders are configured to operate two separate braking systems.
Acura: Brake Master Cylinder Leaking
A cup seal in the master cylinder is sensitive to the type of brake fluid used in the brake system. If the brake fluid is replaced with anything other than Acura (or Honda) Genuine DOT 3 Brake Fluid, and the brakes are manually bled, the cup seal may twist in its retention groove and create a small leak. The brake fluid can then leak into the brake booster, and the brake system indicator will eventually come on because the brake fluid level is low.
Raybestos Adds New Import Coverage To Master Cylinder Line
These additions increase import coverage for a variety of vehicle makes, including Honda, Isuzu, Kia, Lexus, Mercedes-Benz, Mazda, Nissan, Subaru, Toyota and Volvo.
CARDONE Expands Master Cylinder Coverage
CARDONE Industries recently announced an expansion of its line of master cylinder SKUs to cover millions more vehicles on the road. The company now offers a total of 2,164 SKUs in its A1 CARDONE Reman Master Cylinders product lineup to cover more than 217 million vehicles.
Tech Tip: Adjustable Clutch Master Cylinders
Following a new clutch installation, there is nothing worse than experiencing slipping or release problems. Many times installers even begin to believe that the new clutch kit is defective. This is not correct, in most cases! The majority of the time, a simple, quick adjustment will alleviate any problems. Most Japanese/Korean imports utilize an adjustable clutch master cylinder. When a new clutch kit is installed, the master cylinder needs to be re-adjusted to work properly with this new kit and avoid release and slipping problems.
Master Cylinder Service On 2005-2009 Saab 9-7X
Some owners may complain of a squeaking noise when applying or releasing the brake pedal. According to Saab, the problem is contaminated brake fluid. The contaminated fluid may swell the master cylinders piston seals.
Tech Tip: Squeaking Master Cylinder On 2005-2009 Saab 9-7X
Some vehicle owners may complain of a squeaking noise when applying or releasing the brake pedal. According to Saab, the problem is contaminated brake fluid. The contaminated fluid may swell the master cylinders piston seals.
CARDONE Digital Master Cylinder ID Guide Includes Import Coverage
The CARDONE digital Master Cylinder ID Guide helps technicians identify Master Cylinders by image, bore and port size and casting number for new and reman CARDONE Master Cylinders from 1990 and earlier.