Road To AAPEX Ep. 6: The End Of The Road

Road To AAPEX Ep. 6: The End Of The Road

Did Joe and the Cadillac make it to Las Vegas for AAPEX?

It all comes down to this. 

“I didn’t want something easy. I wanted something that was going to be an ‘Are you going to make it?’ moment every time I get in the car.”

That’s how Babcox Media’s Joe Keene set the stage in the first episode of Road to AAPEX, well before he knew what was ahead of him. And oh boy did he deliver on those “Will he make it?” moments. 

The road to fixing up a 33-year-old Cadillac Brougham with more than 180,000 miles on the odometer to make the 2,500-mile drive from Akron, Ohio, to Las Vegas for AAPEX was long and unpredictable. It was also fun and exciting as Keene, an ASE-certified technician, was able to take in the sights of America’s automotive past on Route 66. 

As the journey rolled on, one thing became clear: If the Caddy was going to make it, if it was even possible, the automotive aftermarket would make it happen. The automotive supplier partnerships, the independent shops—the people that are the heartbeat of the aftermarket industry—were behind him every step of the way.

Now there’s just one question left to answer: Did Joe and the Caddy make it to Las Vegas for AAPEX? 

For the answer, watch the episode above.

You May Also Like

Wheel Bearing Shortcuts

When you’re installing a wheel speed sensor on a hub unit, never ever remove it from the original unit. Sponsored by Auto Value and Bumper to Bumper.

Hey, I got a great shortcut for you. If you're working on wheel hubs, if you have one where you're dealing with a harness for the wheel speed sensor that may be behind a fender liner, has all these horrible Christmas trees on it to get in and out from behind areas that you've never seen, well, you can just simply take the old out and then put it in the new and get rid of the new harness. Do not ever use the shortcut. It is a bad thing to do because you are destroying the calibrated air gap that was done at the factory, and this is very precise, done with computers. By removing the wheel speed sensor from one and putting it in another, you've just changed everything completely and you're gonna cause yourself a comeback. Do you wanna know why? Well, it's gonna cause an erratic wheel speed sensor code or issues with the air gap.

Maverick Tire Changer: Handling Large Custom Wheels

Large, custom 4×4 wheels are all the rage, and Hunter’s Maverick tire changer makes handling them a breeze.

Introduction to the Maverick Tire Changer

Joe Keene speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.

Schaeffler and Sustainability with Jerry Conroy

Conroy shares insights into his career trajectory, the evolving landscape of the company’s aftermarket operations, and its commitment to innovation and sustainability.

Flushing the Brake Fluid is Critical on Every Brake Repair

Making sure the brake fluid is the correct quality is critical. Sponsored by Auto Value and Bumper to Bumper.

Other Posts

Selecting the Right Oil for your Customers Engine

Learn how to educate customers on the importance of OEM specifications and premium lubrication for their vehicles’ maintenance needs.

At the Intersection of Tradition and Innovation with Grace Hovis

Grace Hovis’s journey in Hovis Auto & Truck Supply blends tradition with digital innovation in the automotive aftermarket industry.

Turbocharger Maintenance ft. Rein TechSelect Turbo Kits

Learn about common challenges with turbocharger maintenance and how Rein TechSelect Turbo Kitsmake the repair process easier for technicians.

The Standard® Advantage

Standard® knows that what comes out of a repair is directly dependent upon what goes into the box. This video is sponsored by Standard®.