Catalytic Converter Theft

VIDEO: Catalytic Converter Theft

Do not replace a missing converter with a “test pipe.” This video is sponsored by Auto Value & Bumper to Bumper.

You have probably seen the national and local headlines about catalytic converter thefts. But what happens after the converter has been cut from the vehicle? What must be done to get the victim back on the road?

Most catalytic converter thefts are covered under the customer’s comprehensive insurance policy. You might have to work with the insurance company to determine if they will cover replacement with an OE equivalent or aftermarket catalytic converter. Direct fit exhaust components are the best bet. But depending on how the converter was cut from the vehicle, you might have to repair a flange on the vehicle.

Some customers might not have comprehensive insurance, so the replacement might be on their dime. Don’t even try to source a used catalytic converter. The EPA made selling used catalytic converters illegal in 1990, unless tested and certified by the agency. They also enacted requirements that shops must follow if a catalytic converter is replaced to document the procedure.

Do not replace the missing converter with a “test pipe” or just a length of pipe. First of all, it will not keep the check engine light out, and it can cost you a $10,000 fine from the EPA.

No matter who is paying the bill, both the customer and installer must sign a statement explaining why the converter was replaced. Manufacturers either provide such a statement with the converter or have an example in their catalogs. You must retain copies of the invoices and statements for up to six months.

Protecting the converter on vehicles like a Toyota Prius, Ford F-250 or Honda Element has created a cottage industry. These devices are designed to prevent thieves from accessing the converter or make it difficult to cut the pipes. Some muffler shops that can still weld have been fabricating cages and shields to stop thieves or make it more challenging to steal the converter. Some police departments are also offering services where they will etch the VIN onto a converter’s shell. Another strategy has been to spray paint the catalytic converter with red or orange high-temperature paint that might make a thief reluctant to steal the converter.

This video was sponsored by Auto Value and Bumper to Bumper

You May Also Like

Wheel Bearing Shortcuts

When you’re installing a wheel speed sensor on a hub unit, never ever remove it from the original unit. Sponsored by Auto Value and Bumper to Bumper.

Hey, I got a great shortcut for you. If you're working on wheel hubs, if you have one where you're dealing with a harness for the wheel speed sensor that may be behind a fender liner, has all these horrible Christmas trees on it to get in and out from behind areas that you've never seen, well, you can just simply take the old out and then put it in the new and get rid of the new harness. Do not ever use the shortcut. It is a bad thing to do because you are destroying the calibrated air gap that was done at the factory, and this is very precise, done with computers. By removing the wheel speed sensor from one and putting it in another, you've just changed everything completely and you're gonna cause yourself a comeback. Do you wanna know why? Well, it's gonna cause an erratic wheel speed sensor code or issues with the air gap.

Maverick Tire Changer: Handling Large Custom Wheels

Large, custom 4×4 wheels are all the rage, and Hunter’s Maverick tire changer makes handling them a breeze.

Introduction to the Maverick Tire Changer

Joe Keene speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.

Schaeffler and Sustainability with Jerry Conroy

Conroy shares insights into his career trajectory, the evolving landscape of the company’s aftermarket operations, and its commitment to innovation and sustainability.

Flushing the Brake Fluid is Critical on Every Brake Repair

Making sure the brake fluid is the correct quality is critical. Sponsored by Auto Value and Bumper to Bumper.

Other Posts

Selecting the Right Oil for your Customers Engine

Learn how to educate customers on the importance of OEM specifications and premium lubrication for their vehicles’ maintenance needs.

At the Intersection of Tradition and Innovation with Grace Hovis

Grace Hovis’s journey in Hovis Auto & Truck Supply blends tradition with digital innovation in the automotive aftermarket industry.

Turbocharger Maintenance ft. Rein TechSelect Turbo Kits

Learn about common challenges with turbocharger maintenance and how Rein TechSelect Turbo Kitsmake the repair process easier for technicians.

The Standard® Advantage

Standard® knows that what comes out of a repair is directly dependent upon what goes into the box. This video is sponsored by Standard®.