VIDEO: Is A Battery A Diagnostic Tool?

VIDEO: Is A Battery A Diagnostic Tool?

An underperforming battery can cause many diagnostic testing problems. This video is sponsored by The Network Academy.

What do Germans call a dead car battery? A “Nein” volt.

All jokes aside, we’re talking about how finding the right battery may take a little more diagnostic time, but can make for a happier customer.

With any diagnostic procedure, you first try to rule out the obvious causes of a fault or customer complaint. These items can include fuses, fluid levels and the mechanical operation of the components. But, one item often forgotten is the health of the battery.

The voltage levels in an electrical system can determine how sensors, modules and actuators perform. If the current battery is under performing, it can cause many diagnostic testing problems and codes.

For example, suppose a battery can’t keep the system voltage between 7-9 volts while cranking the engine. In that case, it can generate multiple U-codes indicating a loss of communication between the modules all over the vehicle. Even if the engine starts on some vehicles, the ABS and stability control could go into a fail-safe or inactive mode because the Hi-Speed CAN network crashed during starting due to low voltages.

If you have a scope, you can graph the voltage drop, looking at not only how far the voltage dropped, but the length of time.

On some diagnostic conundrums, you will need a healthy battery to carry out some diagnostic tests. If the battery is failing, you could have inconclusive results if you are trying to bi-directionally control a component line a transmission solenoid or even EVAP valve.

Of course, having the RIGHT battery in the car is the FIRST step.

If the car came standard with an AGM battery, it’s in everyone’s best interest to be sure that’s what it’s replaced with. With two times the cycle life, 20 times the vibration protection and great durability, AGM technology delivers better starting protection than conventional battery designs.

So, before you start wasting valuable diagnostic time, always evaluate the condition – and the composition – of the battery first. If the battery is underperforming, get the customer to authorize replacement. You could resolve many problems before you haul out the diagnostic big guns.

This video is sponsored by The Network Academy.

You May Also Like

Wheel Bearing Shortcuts

When you’re installing a wheel speed sensor on a hub unit, never ever remove it from the original unit. Sponsored by Auto Value and Bumper to Bumper.

Hey, I got a great shortcut for you. If you're working on wheel hubs, if you have one where you're dealing with a harness for the wheel speed sensor that may be behind a fender liner, has all these horrible Christmas trees on it to get in and out from behind areas that you've never seen, well, you can just simply take the old out and then put it in the new and get rid of the new harness. Do not ever use the shortcut. It is a bad thing to do because you are destroying the calibrated air gap that was done at the factory, and this is very precise, done with computers. By removing the wheel speed sensor from one and putting it in another, you've just changed everything completely and you're gonna cause yourself a comeback. Do you wanna know why? Well, it's gonna cause an erratic wheel speed sensor code or issues with the air gap.

Maverick Tire Changer: Handling Large Custom Wheels

Large, custom 4×4 wheels are all the rage, and Hunter’s Maverick tire changer makes handling them a breeze.

Introduction to the Maverick Tire Changer

Joe Keene speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.

Schaeffler and Sustainability with Jerry Conroy

Conroy shares insights into his career trajectory, the evolving landscape of the company’s aftermarket operations, and its commitment to innovation and sustainability.

Flushing the Brake Fluid is Critical on Every Brake Repair

Making sure the brake fluid is the correct quality is critical. Sponsored by Auto Value and Bumper to Bumper.

Other Posts

Selecting the Right Oil for your Customers Engine

Learn how to educate customers on the importance of OEM specifications and premium lubrication for their vehicles’ maintenance needs.

At the Intersection of Tradition and Innovation with Grace Hovis

Grace Hovis’s journey in Hovis Auto & Truck Supply blends tradition with digital innovation in the automotive aftermarket industry.

Turbocharger Maintenance ft. Rein TechSelect Turbo Kits

Learn about common challenges with turbocharger maintenance and how Rein TechSelect Turbo Kitsmake the repair process easier for technicians.

The Standard® Advantage

Standard® knows that what comes out of a repair is directly dependent upon what goes into the box. This video is sponsored by Standard®.