Maintenance IQ Archives - Import Car
Don’t Forget Lubrication During an Oil Change

Your shop probably has an oil change and you probably call it an LOF. So let’s put that L back in oil change: lubrication, oil, filter.

The Transmission Fluid Myth That Won’t Go Away

Should you be worried about changing the fluid in a high-mileage transmission? Urban legend says doing so may cause it to fail —here’s the truth.

A Trick for Selling Filters

Using a digital video inspection, you can document the condition of the filter and start a conversation with a customer. But there are a couple of rules you should follow.

Check for Decoupler Pulley Wear and Tear

This story starts with a leaking radiator, and it’s where three things collide: inspection, maintenance, and doing the complete job.

Watch Out for Vehicles with Two Thermostats

If a vehicle has overheated, it’s always a good idea to replace the thermostat—and make sure you’re replacing both.

Do Headlight Bulbs Degrade or Just Fail?

You’ve probably heard that marketing claim out there that light bulbs dim over time, especially headlights. Is it true?

How to Service a Plastic Oil Pan

The plastic oil pan is a controversial part for technicians; although not so much for engineers. Here’s how to service them.

The Importance of Timing the Engine

No matter whether you’re changing a belt for maintenance issues or a timing chain for running issues, you need to be careful when timing the engine.

‘Is This Normal?’ Testing Customer Oil Consumption

With today’s engines, the oil change interval differs by each different platform, vehicle and engine.

Oil Filter Inspection Information

When inspecting an oil filter with just the naked eye, you’re probably not going to see any potential contaminants because they’re too small.

Why You Should Replace a Torn or Ripped Boot on a Ball Joint or Tie Rod End

It may look perfectly fine, there may be no play, but what we’re talking about is the integrity of the joint and the internal surfaces.

Check All the Angles When Doing an Alignment

There are certain diagnostic angles that you need to make sure that you look at—and this is the benefit of having a modern machine.