MACS Show: Technical Session Coverage
Once a year, the Mobile Air Conditioning Society (MACS) hosts a trade show for A/C shop owners and technicians. This year’s event in Orlando, FL, provided a wealth of service information to those who attended the technical sessions. For those who couldn’t be there, we pass along some of the highlights from the technical sessions.
OBD II Diagnostics:Tips And Tricks to Make the Process Easier
The Malfunction Indicator Lamp (MIL) can be a golden light of opportunity for your shop. If the light comes on, it means the Onboard Diagnostics II system (OBD II) has detected an emissions-related problem. OBD II is designed to turn on the MIL if a problem occurs that may cause emissions to exceed federal limits
Mass Air Flow Operation Strategy
When diagnosing hot-wire air flow meters (A/F meters) on Subarus and similarly equipped Asian vehicles, technicians may find that, while the meter passes all recommended test procedures, the engine exhibits driveability conditions associated with lean air/fuel mixture ratios. In these cases, it’s best to form a diagnostic strategy based on the relatively simple operating principles
Muscling in on Restoration & Performance Work: Part 1
As automotive technology continues to become more complex with each new model year, you may be longing for the “good ol’ days” when engines had carburetors and distributors but no sensors, fuel injectors or computers. Most driveability problems were fairly simple to diagnose and only required a trained ear and a few basic tools. Alas,
Component Connection: Wiper Motors
If there is one system that vehicle owners believe is inhabited by Gremlins, it’s the windshield wipers. Unfortunately, car owners don’t normally realize there is a problem with the wiper system until they need them most – when it’s raining. No matter what type of car you service, when it comes to wiper-related problems, the
Servicing Brake Hydraulic Components
Anyone who works on brakes should be familiar with basic hydraulics and the various components that make up the hydraulic portion of the brake system. So if you’re not as familiar with this subject as you should be, keep reading and we’ll refresh your memory. We’ll start at the heart of the system, which is
Matching Your Techs with the Right Job
Just a single decade ago, many industry experts speculated that 80% of the workflow passing through an independent repair shop would involve some type of high-level diagnostic process. Today, it’s obvious that, with the infusion of electronic operating systems, high-level diagnostics is now approaching that level of total workflow. Nevertheless, many others continue to ridicule
A/C Update
Once a year the Mobile Air Conditioning Society (MACS) hosts a trade show for A/C shop owners and technicians. This year’s event was held in Orlando, FL, January 22-24, and provided a wealth of service information to those who attended the technical sessions. For those who could not be there, we pass along some of
Aftermarket Update
Trade Press Gets First-Hand Look During Tour of Bosch’s State-of-the-Art South Carolina O2 Sensor Plant Oxygen sensors are one of the key sensors in every engine’s fuel management feedback control system. Consequently, O2 sensors play a vital role in maintaining low emissions, good fuel economy and peak performance. Developed by the Robert Bosch Corporation, O2
Understanding Today’s Multi-Coil Ignition Systems
Distributorless Ignition Systems (DIS) have been around for more than two decades, but in recent years the trend has been to multi-coil systems such as Coil On Plug (COP) or Coil Per Cylinder (CPC) ignition systems, and Coil Near Plug (CNP) ignition systems. COP systems have become the hot setup for a number of packaging,