Volvo Unveils Two Hot New Concept Cars at the 2005 SEMA Show

Volvo Unveils Two Hot New Concept Cars at the 2005 SEMA Show

The two exciting new concept cars from Volvo explore the opposite ends of the spectrum in terms of just how far vehicle design may be pushed. Painted a glittering Saffron color reminiscent of a desert sunset, the XC70 AT (All Terrain) takes the production Volvo XC70 crossover wagon to the off-road extreme. The T6 Roadster takes Volvo to the drag strip with its 1930s inspired body, wide tires and low beltline.

The two exciting new concept cars from Volvo explore the opposite ends of the spectrum in terms of just how far vehicle design may be pushed. Painted a glittering Saffron color reminiscent of a desert sunset, the XC70 AT (All Terrain) takes the production Volvo XC70 crossover wagon to the off-road extreme. The T6 Roadster takes Volvo to the drag strip with its 1930s inspired body, wide tires and low beltline.

XC70 AT
The XC70 AT features a 2.5-liter inline 5-cylinder engine that is normally found in the V70 R sport wagon. But where the V70 R makes an impressive 300 horsepower, the XC70 AT, with its Garrett GT2835R turbocharger and ipd/MTE Stage III software upgrade makes 408 horsepower at 6,200 rpm. Keeping the hot-blooded engine cool is an Aquamist in-cylinder intercooling system and an extra large top-mounted intercooler. Low restriction 3-inch stainless steel exhaust pipes emit a husky sound that would be more familiar coming from a Volvo XC90 V8.

Producing an amazing 398 lb-ft of torque at a low 4,000 rpm, the XC70 AT uses the same 6-speed automatic transmission that is standard in the XC90 V8 and the 2006 V70 R. Making sure all four wheels get the most of the broad torque curve is Volvo’s legendary fully automatic all-wheel-drive system by Haldex.

New on the production XC70 for 2005 is Volvo’s remarkable four-C adaptive chassis ride system with sport and comfort modes. Taking this concept to the next level, ipd developed a custom fully independent air ride suspension offering 4-inches of adjustability via dash-mounted buttons. Add in the ipd designed 4-inch lift kit and the XC70 AT can ride up to 8 inches higher than the production Volvo XC70. To keep body roll in check, ipd 25-mm front and 28-mm rear anti-sway bars have been fitted.

Additional accessories include a 1,000 generator, high-lift jack, spare jerry can and tire and remote exterior battery terminal connections.

T6 ROADSTER
Has Volvo gone mad? Perhaps. But that’s about the only word to describe the hand-built hotrod based on Volvo components and a twin turbocharged inline 6-cylinder engine from a car manufacturer more widely known for safety and functionality.

You won’t find a mail-ordered headlight or a grille from a Prowler on the T6 Roadster. What you will find are OEM Volvo parts including a twin-turbocharged 2.9-liter inline 6-cylinder engine borrowed from an S80.

Where you find the engine, however, isn’t under the hood. It’s in back, located just behind the supportive leather bucket seats that were also lifted from a Volvo S80. The gearbox is a 5-speed Geartronic transmission that sends the power to the rear wheels. To help keep the engine cool, the rear decklid automatically lifts when a preset temperature is reached inside the engine compartment. Up front is a small compartment containing the mechanicals for the functioning ABS brakes and the top-notch audio equipment.

The custom-fabricated tubular steel frame was hand formed and utilizes rear subframes from the donor S80. It features stainless steel A-arms for the fully independent front and rear suspension systems. Volvo C70 spindles, custom carbon-fiber leaf springs and a shortened S80 steering rack can be found up front. Around back are S80 front spindles and lower trailing arms with remote-reservoir Ohlins shock absorbers. The rear coil-over shocks, incidentally, are centrally mounted in the engine compartment. Braking up front is handled via 6-piston calipers and 330-mm discs while the rear discs are carried over from the Volvo S80. The front wheels are 8.5 inches wide and 20 inches in diameter, the rears are a full 10-inches wide and 22 inches in diameter.

Inside, the T6 Roadster looks as if it rolled off the Volvo factory line in Torslanda, Sweden. Aside from the seats, the instruments, headrests, shifter handle and pedal assembly can all be found in the Volvo S80. A steering wheel from a Volvo S60 adds a sporty look, while the instrument panel has been hand fabricated to locate the gauges centrally in the passenger compartment.

You May Also Like

Standard Motor Products Expands Emission Control Program

SMP’s program features more than 3,500 parts, including EVAP, EGR and positive crankcase ventilation products.

Standard Motor Products, Inc. (SMP) announced it is expanding its Emission Control program, which includes evaporative emission control (EVAP), exhaust gas recirculation (EGR) and positive crankcase ventilation emission control systems.

Standard’s EVAP program features over 1,300 part numbers and includes Vapor Canister Purge Pumps, Vapor Canister Vent Hoses, Vapor Canister Purge Valve Hoses, Canister Vent Solenoids, Fuel Vapor Canisters, Canister Vent Valves, Canister Purge Valves, Fuel Vapor Leak Detection Pumps, Canister Purge Solenoids and more. Recently released Standard EVAP components include Vapor Canister Purge Pumps for more than 2 million General Motors SUVs, like the 2023-21 Chevrolet Trailblazer. Fuel Vapor Canisters have been added recently for the 2022-20 Ford Transit, 2023-19 Nissan Altima and more. Canister Purge Solenoids are new for Dodge and Jeep vehicles through 2024.

MPA To Offer Free Part Smart Training in 2024

The sessions will cover brake training, vehicle-specific starter issues, advanced charging systems, DTCs and more.

Repairify Announces Executive Leadership Changes

The company has named Craig Edmonds as president of asTech among other executive appointments.

KYB Launches New Digital Catalog App

The updated app provides much more accurate part number recommendations, according to KYB.

PRT Launches 22 New Products on Complete Strut Assemblies

The new items come to expand the PRT portfolio in North American Market and represents more than 12 Million vehicles in new coverage.

Other Posts

BendPak to Debut Eight-Armed Car Lift Concept at NADA

Octa-Flex improves technician productivity, convenience and ergonomics, according to BendPak.

PRT Heavy Duty Presenting Innovations at HDAW ‘24

PRT is exhibiting a full line of shocks and air springs for heavy-duty applications.

Stellantis, BlackBerry QNX and AWS Launch Virtual Cockpit

The innovation enables Stellantis to create virtual versions of car controls and systems, which behave like those in a real car but can be developed and tested more rapidly.

Clarios, Altris Announce Collaboration Agreement

The partnership is aimed at developing low-voltage sodium-ion batteries for the automotive industry.