Getting Tanked: Flex Fuel Engine Modifications Allow for Alcohol-Based Fuel
In case you haven’t heard, Flex Fuel technology is really starting to take off in the U.S., becoming more popular in late-model vehicles than technicians may realize. If you haven’t had any training on these vehicles, you may find some of the technical changes OEMs have made to the engines will alter the way you
Odds & Ends:
The Return of the Mustang Pedal Car It wasn’t long after Henry Ford began mass-producing Model Ts at the turn of the century that kids took to sidewalks in miniature pedal cars. The steel-covered toys remained high on children’s wish-lists until the ’70s when the company stopped producing them. Just as the 1965 Mustang was
Foreign Affairs: Can Your Shop Handle OBD Multiplexing?
“CAN” is the new buzz word in automobile diagnostics. It stands for Controller Area Network and is a protocol for onboard diagnostics and scan tools. CAN is a high-speed data link that provides more information at a faster rate for better communication between onboard electronics and external diagnostic equipment. Many manufacturers have already started incorporating
Using Caster to Properly Align Vehicles
Every story has an angle, and this one is no exception. In this case, we’re looking at one of the fundamental wheel alignment angles: caster. Caster is defined as the forward (negative) or rearward (positive) tilt of the steering axis as viewed from the side. Caster is measured in degrees from an imaginary line perpendicular
Oil Change Intervals
Oil Change Intervals
Compressors, Condensers & Refrigerant
Hot weather is just a few weeks away in many areas of the country, and that means plenty of air conditioning service opportunities. Years ago, A/C was considered a luxury. Now it’s a necessity. Automatic climate control systems use A/C year-round for defrost and dehumidification as well as cooling. Even so, it’s hot weather that
Light Diesel Service Opportunities are Growing
Diesels are back! During the past six years, more than 2.5 million new diesel-powered cars and light trucks have been sold in the United States. Though the numbers are not huge, they are growing. Diesel usage in U.S light vehicles has almost doubled over the last five years (from 2.2% in 1999 to 3.9% in
Mastering Mercedes Multiplexing
“CAN” is the new buzz word in automobile diagnostics. It stands for Controller Area Network and is a protocol for onboard diagnostics and scan tools. CAN is a high-speed data link that provides more information at a faster rate for better communication between onboard electronics and external diagnostic equipment. Many manufacturers have already started incorporating
Engine Lubrication: Motor Oil, Pumps and Filters
The best way to get to the bottom of this subject is to go right to the heart of the engine’s lubrication system and start with the oil pump. The oil pump’s job is to suck oil in from the crankcase and push it through the filter and oil galleries to the crankshaft and camshaft
MACS Show: Technical Session Coverage
Once a year, the Mobile Air Conditioning Society (MACS) hosts a trade show for A/C shop owners and technicians. This year’s event in Orlando, FL, provided a wealth of service information to those who attended the technical sessions. For those who couldn’t be there, we pass along some of the highlights from the technical sessions.