Tech Feature: Eliminating the Con-‘Fusion’ of Servicing Ford’s Mid-Size Vehicles
Nestled into the marketing space between the Focus and the Taurus/Five Hundred is the Ford Fusion. The Fusion came with a choice of four-cylinder and six-cylinder Duratec powerplants. The inline four-cylinder Duratec 23 is a 2.3L 16-valve DOHC engine.
Honda Tech Tip: Dealing with EGR Issues
Exhaust gas recirculation (EGR) has been used for years to control combustion temperature to prevent spark knock as well as control NOx emissions. For the most part, these systems were trouble-free and required service only if you were dealing with a spark knock issue, or if the valve opened too early, resulting in a tip-in acceleration stumble, or the more common, bad idle quality caused by the valve not closing completely at idle.
40 years of the Mazda Rotary Engine
On May 30, 1967, Mazda launched the world’s first twin-rotor rotary-engined car, the Mazda Cosmo Sport. The company now celebrates that engine’s 40th anniversary. In these past 40 years Mazda has produced nearly 2 million vehicles powered by the rotary engine. It was not until 1970, however, that Mazda sold rotary-engine-equipped cars in the United
Diagnostic Solutions: Cooling Fan Failure Diagnosis
Cooling fan operation is often taken for granted by many technicians because testing a cooling fan requires at least 15 minutes of fast idling or running until the coolant temperature reaches 220-230° F. If the cooling fan doesn’t activate, a coolant temperature sensor, fan relay, fan electrical circuit or the fan itself may be at
Carley’s Corner: Smoother Surface Finishes for Today’s Engines
As engine technology continues to advance, so do the surface finish requirements for many of today’s gaskets. Some engines today require an almost mirror-like finish on the cylinder head and block deck surfaces to seal the head gasket – which means many machine shops may need to upgrade their surfacing equipment to achieve the smoother