Carley’s Corner: New Stuff from the AAPEX & SEMA Shows
Having just wrapped up a week in Las Vegas at the AAPEX (Automotive Aftermarket Parts Expo) and SEMA (Specialty Equipment Manufacturers Association) shows, I have some interesting news to report. A company called Green Earth Technologies introduced a new high-quality synthetic motor oil made from dead cows. The oil is made from animal fat (beef
Tech Feature: Reasons for Piston Replacement
Though pistons can often be salvaged when rebuilding or remanufacturing an engine, sometimes they have to be replaced. The original pistons may have worn or damaged ring grooves, wrist pins or skirts, or they may have cracks. New pistons may also be necessary if the cylinders have too much taper wear and the block has to be bored to oversize. Or, maybe you just don’t want to reuse the original pistons if you’re building a performance engine or a high load engine like a diesel light-duty pickup truck.
Internal Injuries: Reasons for Piston Replacement
Though pistons can often be salvaged when rebuilding or remanufacturing an engine, sometimes they have to be replaced. The original pistons may have worn or damaged ring grooves, wrist pins or skirts, or they may have cracks. New pistons may also be necessary if the cylinders have too much taper wear and the block has
Mitch Schneider: A Total Eclipse of the Son
Not all that long ago, an entire generation learned about high performance and hot rods from Jan & Dean and The Beach Boys. Their lyrics romanticized surfing, cars and the California lifestyle. I knew kids who quoted those lyrics as they described either the car they were driving, or the one they desperately wanted to drive. And, I guess that was OK.
Tech Tip: Import Diesel Service Represents an Emerging Service Opportunity
The introduction of more and more new diesels in the coming years means technicians will have to keep up-to-date with the latest technology. That means more training, investing in the latest scan tools and software, and buying the special tools that may be required to service these engines. But for import specialists who are up on diesel technology, it’s good news because it means more service opportunities and more potential business.
Tech Update: Import Diesel Service Represents an Emerging Service Opportunity
The introduction of more and more new diesels in the coming years means technicians will have to keep up-to-date with the latest technology. That means more training, investing in the latest scan tools and software, and buying the special tools that may be required to service these engines. But for import specialists who are up
TDI Driveability: Carbon Plugging of the Intake System
Volkwagen has been selling diesel-powered cars in the U.S. for almost 30 years. Turbocharged versions have been available for 25. That is a lot of experience and a testament to the development of a reliable, efficient and durable powerplant. The introduction and development of the TDI (turbocharged direct injection) brought the VW diesel into the
Advances in Piston Ring Technology
Piston rings have one of the toughest jobs inside an engine. They’re slammed up and down between the ring lands thousands of times a minute, they’re subjected to searing temperatures and extreme pressures, and they’re constantly scraping back and forth against the cylinder walls. In spite of all of this, the rings are expected to
2006 Volkswagen GTI – All the Essentials of the Original Hot Hatchback and More
With the 2006 all-new GTI, Volkswagen is offering the fifth generation, or complete redesign, of this historic model. The "Mark 5" edition, as it is referred to by Volkswagen internally and by true GTI enthusiasts, continues the automaker’s reputation of providing affordable German engineering with distinct European styling and high-value equipment levels.
Bad Gas Update
How bad can it get? When the price of gasoline soared to over $3 a gallon after hurricane Katrina, people were shocked. They actually began to change their driving habits to conserve fuel by eliminating unnecessary trips, sharing rides to work, staying home in the evening instead of going out and doing what little they