You searched for 4WD - Page 13 of 14 - Import Car
CV Joints & Halfshafts

Rear-wheel drive has made a comeback on many large luxury import nameplates, but more than 80% of all cars on the road today are front-wheel drive. Most small- and mid-size cars are FWD, and all import minivans have FWD. What’s more, most of the full-size and crossover 4WD SUVs have halfshafts with CV joints front

Tech Tip: Nissan Bearing Noise from Transfer Case Area

If bearing noise (rumbling noise) is coming from the bottom of the vehicle when the transfer case is in 4WD high and throttle application is light with speed between 15 and 35 mph, the original transfer case companion flange dust cover may be amplifying the sound of the bearing.

Toyota Engine Repair: Recurring Failures Flee with Proper Maintenance

Toyota’s 22R series 4-cylinder SOHC engine has survived and thrived in its cars and trucks for nearly 30 years, and is a desired powerplant for its power, torque and reliability. The basic design is a continuation of the engine that preceded it, the 20R, which was used in cars and trucks starting in early 1978.

Getting Tanked: Flex Fuel Engine Modifications Allow for Alcohol-Based Fuel

In case you haven’t heard, Flex Fuel technology is really starting to take off in the U.S., becoming more popular in late-model vehicles than technicians may realize. If you haven’t had any training on these vehicles, you may find some of the technical changes OEMs have made to the engines will alter the way you

Tech Tip: Curing Honda Rear Suspension Noise and ABS Pump Maladies

Certain 1988-2000 Civics may exhibit a clunk or squeak from the rear suspension when driven over rough or bumpy roads. The probable cause is a broken rear trailing arm bushing(s).

Aftermarket Update: Visteon Grows Portfolio of OE-Quality Replacement Parts

Conoco, is owned by Paul Rush, a finalist for the 2004 CARQUEST Excellence Award and a TECH-NET Professional Auto Service member. Rowledge will receive an all-expense paid trip for two to the ASE board meeting where he will be presented with a trophy and a gold ring. He also will be honored as the co-Grand

More Vans May Be Cruising Back on the Roads

In a recent news article by Associated Press writer John Porretto, General Motors Corp. and nearly two dozen outfitters plan to spend more than $2 million in an effort to revive demand for big, souped-up conversion vans. No longer decorated with beads and shag carpeting, conversion vans have evolved into sophisticated vehicles for families and

The Top 5 Favorite Tools of the Country’s Top Technicians

Dan & Kris Cesena Honda Hospital, Inc. San Mateo and Milpitas, CA Our top five favorite tools (and why) are: The Snap-on MicroVAT Battery/Starter/Alternator Tester. Why? Well it makes it much easier to test batteries, alternators and starters; it has an infrared port, which sends the data to an optional thermal printer; and with these

Understanding Seals

It has been a long drive to the lake. The driver carefully backs the trailer down the boat ramp. As the axles hit the water, the hot wheel bearing hubs hit the water. As the bearings’ heat is quenched by the lake water on the outside of the hub, the rapidly contracting air and lubricants

Driveshaft Service

Driveshafts on most rear-wheel drive and four-wheel drive (4WD) vehicles are very durable. Most late-model driveshafts are not serviceable and do not have any lubrication points. But, this does not mean that they can’t wear, or even fail. Driveshaft problems can be spotted from the moment you put the vehicle in gear to pull it