Top 3 Import TPMS Installations That Cost Time And Money

Top 3 Import TPMS Installations That Cost Time And Money

Don't assume that if a TPMS tool can't diagnose or program a sensor that the sensor is bad. Something else may be to blame.

TPMS is increasingly becoming more functional and efficient as technology catches up with the needs of the driver. As TPMS improves and features are added, it can also feel a little more complicated on the service side, as there are often extra required steps that can be overlooked. Programmable sensors and auto location are two examples of features that offer many benefits but may require extra steps during service. Here are three scenarios that tech hotlines often receive to help your shop navigate these processes.

“I installed the sensors and performed the relearn, but the vehicle isn’t recognizing the sensors.”

The most common cause of this scenario is the technician is using a programmable or “writable” sensor – but did not program it. There is a lot of confusion in the market regarding the difference between “programming” and “relearning.” You “program” a sensor and “relearn” a vehicle. If you are using a programmable sensor, you have to tell the sensor what MMY on which it is being used. It is like putting a blank CD in your player and expecting it to know what song to play. You have to first load it with music. Similarly, you have to program the sensor before it will send a signal to the vehicle’s ECU.

“I programmed the sensors, but they aren’t displaying properly on the dashboard.”

Did you relearn the vehicle? Late-model vehicles have a new TPMS feature called “Auto Location.” This feature displays the pressure of each tire on the dashboard. So, if one tire is low on air or one sensor is malfunctioning, you know which tire or sensor needs service, saving you time. In order for that function to work, you need to tell the vehicle which sensor ID is in which tire. You took the first step in telling the sensors to which vehicle their signal is being sent, but now you need to tell the vehicle where those sensors are by performing a relearn procedure.

“My TPMS tool won’t program the sensor.”

It is often assumed by the user that if the TPMS tool isn’t able to diagnose or program the sensor, then the sensor must be faulty. However, if you are using an OE-quality sensor, then that is likely not the case. OE suppliers typically leave a very small allotment for faulty sensors on the manufacturing line (as an example, Schrader is four parts per 1 million). If you don’t use an OE-quality sensor, there is a higher chance that the sensor is faulty, but even more likely that one of these two scenarios exists:

1.The tool might not be updated with the latest TPMS tool software. Software updates are extremely important for you to have access to any new features and bug fixes that are included in the update, but they are also important because they include the latest sensor coverage for new vehicles on the market. If you don’t have the latest update, then the vehicle MMY may or may not have coverage on the tool.

2. The TPMS tool does not support coverage of the sensor you are using. All TPMS tools cover a unique set of sensor brands. Some companies create their own tools to work only with their sensors, while some tool companies cover multiple brands of sensors. Depending on which tool you own, it may or may not work with the brand of sensor you are using. 

This article courtesy of Tire Review.

You May Also Like

Top 10 Brake Mistakes

Here are the top 10 brake mistakes technicians can make.

1. Not cleaning the brake slides and hardware: Just slapping new pads and abutment clips where the old ones once resided never works. The caliper bracket slides need to be clean and free from rust. Don’t get overly aggressive with the wire brush. Some automakers are using anti-corrosion coatings and surface treatment on the brake caliper bracket lands. If brake cleaner and a nylon brush can’t tackle the deposits, you might be making the corrosion worse by using a wire wheel or file.  

Fine-Tuning Your Wheel Balancing Process

The first step to a smooth ride and well-balanced tire has nothing to do with the balancer.

Drilled and Slotted Rotors

There’s real science behind the location of holes, slots and grooves in today’s brake rotors. Plus, they look great too.

Laying Out Your Shop for ADAS/EV Repairs

With so many vehicles equipped with some form of ADAS, rethinking your electronics layout or plan might be in order.

Air Ride Suspension Diagnostics

The key to understanding the embedded logic of air ride systems is using service information.

Other Posts

How To Service BMW Tire Monitor Systems

BMW has offered Tire Pressure Monitoring Systems (TPMS) for more than 20 years. These early indirect and direct systems were implemented not to meet the 2007 government mandate but to inform the driver when an expensive Michelin or Bridgestone run-flat tire was deflating. Some 2002 and 2003 models have an indirect system called Flat Tire

TPMS Tools and Sensors

Transform TPMS with advanced diagnostics and sensor programming. This video is sponsored by Bosch.

Honda Indirect TPMS Systems

Honda indirect TPMS systems do not have air pressure sensors inside the tires.

Autel’s TS900 TPMS Tool

Beyond TPMS, the Autel TS900 shines as a full-service and maintenance tool.