Water Pump Archives - Page 5 of 6 - Import Car
Tech Feature: The Nuts and Bolts of Belt and Hose Service

Today, belts and hoses are a routine inspection item and may not need replacement even at 100,000 miles or more of service. Unfortunately, many vehicle owners and technicians forget that heat, load, pressure and atmospheric pollutants eventually deteriorate a vehicle’s rubber parts.

Tech Tip: Noisy Infiniti Water Pump Flange

An Infiniti driver may complain of a screeching noise when the vehicle is first started in the morning. The noise dissipates once the vehicle is warmed up. This condition may occur if the water pump had recently been replaced and the fan coupling to water pump flange bolts were not torqued correctly.

Tech Tip: Water Pump Plastic Impeller Failure

Plastic impellers erode because of steam in coolant. Head gasket leaks and cracked heads allow aeration of the coolant, which develops pockets of super-heated air that destroys the impeller.

Tech Feature: Diagnosing and Repairing Cooling System Leaks on Hyundai Models

Cooling system problems will present themselves in a variety of ways, and it’s important that your service writer has the skills to ask the correct questions that will help your techs make efficient repairs.

ASC Industries to Expand Automated New Water Pump Assembly Capacity

ASC Industries will increase its assembly capacity for new water pump production in the first quarter of 2010 with the addition of an automated assembly cell.

Tech Feature: Cooler ‘Heads’ Prevail – Pouring Over GM’s LT1 Engine and Reverse-Flow Technology

The LT1 engine was used in a variety of General Motors models, including 1992-’96 Corvette (Y-body), 1993-’97 Camaro and Firebird (F-body), and 1994-’96 Chevy Caprice and Impala (B-body), Buick Roadmaster and Cadillac Fleetwood (D-body).

Porsche Engine Diagnostics: Misfire Codes, Fuel Trim Faults, Secondary Air Injection

Porsche has been building engines for decades that will literally fit in a suitcase, but are still able to put out horsepower that rivals many larger engines. Find out how to keep the Porsche Boxster engine running smoothly.

Tech Feature: Cooling System and Water Pump Service for the Nissan 3.5L V6

The cooling system on late-model Nissan Altimas and Maximas with the 3.5L V6 engine is similar to many other late-model vehicles in that the water pump is buried and typically takes two to three hours to replace depending on the model, year and your manual dexterity.

Tech Feature: Replacing Water Pumps as Preventive Maintenance

In today’s import repair market, it’s not uncommon to see a vehicle with well over 200,000 miles on the odometer that still is in cosmetically and mechanically "great" condition. The importance of this trend is that many parts that were formerly being replaced on an as-needed basis are now being replaced on a preventive basis. Water pumps are a good example because they serve as an idler pulley on many engines equipped with timing belts and, due to accessibility issues on many transverse engines, should be replaced during any ….

Diagnostic Solutions: Replacing Water Pumps as Preventive Maintenance

In today’s import repair market, it’s not uncommon to see a vehicle with well over 200,000 miles on the odometer that still is in cosmetically and mechanically “great” condition. The importance of this trend is that many parts that were formerly being replaced on an as-needed basis are now being replaced on a preventive basis.

Servicing Solutions: 15 Tips on Servicing Ford F-150s

A bold new look and some subtle changes probably best describe the 2004-and-up Ford F-150. To the technician, it is the subtle changes that he or she needs to be aware of. Beginning with the 2004 model year, Ford launched a new body style for the F-150. It is a new vehicle inside and out.

Cooling System Antifreeze Requirements

When a customer brings you a vehicle that needs a coolant change, what kind of coolant should you use? The type of coolant specified by the vehicle manufacturer? A universal or “all makes, all models” type of coolant? Or should you run the old coolant through a recycling machine and put it back in the