Tech Tip: Acura Front Stabilizer Bar Replacement
Follow the service procedure covered in this Tech Tip when replacing the front stabilizer bar on an Acura MDX.
Land Rover Air Ride Replacement
Land Rover was one of the first import nameplate manufacturers to adopt a four-corner air ride suspension on the Range Rover. Over the past 25 years, the system has become more refined and reliable.
Mercedes-Benz AIRMATIC Suspensions
The Mercedes-Benz AIRMATIC suspension system was introduced in 1999 on the S-Class and has subsequently been used on the E-Class and most of the automaker’s SUVs. The system employs electronically controlled air springs that provide an ideal balance of ride comfort and handling.
Mercedes-Benz Hydraulic Suspension: Dos, Don’ts And Did-You-Knows
It doesn’t seem that long ago when the closest we came to any kind of active suspension on a Mercedes-Benz was the self-leveling rear suspension systems on the station wagons and 560 models (SEL sedan and the SEC coupe). Of course, there were some exceptions – European models and the 450SEL 6.9 starting in the late ’70s were available with hydraulic suspension at all four corners.
Honda: Tracking Down Obscure Chassis-Related Noise Complaints
When the high-mileage V6 Honda Accord was written up at dropoff, notes were added for the tech to look for loose sway bar links and bushings based on the customer’s description of a knocking noise over bumps. While the mileage was high, we’ve serviced this car for years and knew the customer took good care of it. After the initial road test, the tech agreed that it sounded like a sway bar-related problem and it was loud enough that it shouldn’t be difficult to pinpoint. Both the tech and customer agreed it was coming from the right-front.
Air Ride Dryer Diagnostics
The dryer on most air ride systems contains a moisture-absorbing desiccant, such as silica or specialized clay. All desiccants have a limited lifespan; they can absorb only a certain amount of water. Once the desiccant is saturated, the air coming into the system is no longer treated, and water can then accumulate in the system.
Top 10 Mercedes-Benz Repair Tips
With new vehicle sales topping 17.3 million units, and import nameplate VIO also on the rise, you’ll be seeing more imports in your shop that are in need of repair. And, with the increasing complexity and interconnectivity of vehicle systems, diagnostic expertise becomes all the more important. With that said, we bring you this collection of Mercedes-Benz repair tips to aid your service efforts.
Mazda issues recall due to ball joint corrosion
Mazda North American Operations notified the National Highway Traffic Safety Administration (NHTSA) that it was issuing a safety recall for certain 2007-14 model year CX-9 vehicles manufactured from Oct. 24, 2006 to Dec. 28, 2013.
Acura: Clunk Noise While Turning
Model: Acura RSX 2005-’06 Symptom: The front suspension makes a clunking noise while turning. Probable Cause: The front springs are moving on the spring seats. Corrective Action: Replace both front springs and do a four-wheel alignment. Diagnosis: With the engine running, with the vehicle either parked or driving at 5 mph, turn the steering wheel
Saab Front And Rear Spring Replacement
I bought my first Saab 28 years ago, the year after I started working at The Swedish Solution in 1985, and have been driving one ever since. When everything is working right, I believe it’s one of the nicest cars on the road. I’m partial to the 2004 and up 9-3 sports sedan; it’s fast, fun
Import Insights: Volkswagen Golf GTI (June 2014)
Spotlight on Seventh-Generation Golf GTI The Seventh-generation Golf GTI is bigger, lighter, faster and more fuel-efficient than the previous generation, with increases in horsepower and torque as well as an improvement in fuel economy. Engine The Golf GTI features an EA888 2.0-liter turbocharged and direct- injection TSI engine that creates 210 hp and 258 lb.-ft.
