Drive tool between the gasket and then use a hammer from the side to separate the pan from the gasket.
Use the tool to accurately line up and hold cams for proper timing chain alignment on Honda K-Series engines.
This hanger from Lisle can be attached to most toolboxes, benches or walls to store plastic or metal creepers.
Adapt-a-Cap eliminates the need for external pumps, hoses or funnels to transfer fluids, and helps prevent spills and messes.
Disconnect fuel line, EVAP line and DEF fittings with tabs that must be depressed to disengage with these pliers.
Many applications are covered with this seven-piece set.
Designed for the GM EcoTec3 5.3L and 6.2L Motors.
The cross-cut tip design grips most hose clamps from multiple angles. A ratcheting lock mechanism holds the clamp in an open position for hands-free use.
The new Lisle Battery Nut Pliers are used to loosen or tighten battery terminal clamp nuts.
Thin tips on the Lisle Double-Ended Tool provide easy access when removing plastic clips.
The new Lisle Actuator Motor Wrench Set is a toothless, infinite ratchet with a hinged handle design, which makes it easy to remove and replace fasteners on electric HVAC motors.
The wrench has heat-treated arms with specially designed gripping jaws that grab even the most stubborn filters.