Coolants Archives - Page 3 of 4 - Import Car
Tech Tip: Shim Calms Chirping Noises in Honda Models

Some Honda owners may complain of a chirp from the lower timing belt area. The noise is most often noticed at idle, usually after the engine has warmed up. The probable cause is the idler pulley mounting surface is tilted, causing the edge of the timing belt to rub against the side of the pulser flange on the drive pulley (gear).

Tech Tip: Replacing Kia Sorento Coolant Reservior

Certain Sorento vehicles may overheat due to small cracks found on the bottom of the coolant reservoir due to repetitive temperature and pressure fluctuations. The new and improved coolant tank allows some expansion and contraction found in many pressurized cooling systems. This bulletin describes the proper service procedure for identifying and replacing the coolant reservoir tank.

Diagnostic Solutions: Conducting Non-Intrusive Cooling System Inspections

Perhaps the best way to begin when we get a cooling system overheating complaint in our service bay is by using a series of quick, non-intrusive cooling system tests that establish the basics without removing major parts.

Audi Tech Tip: Faulty Hose Composition Causes Odor on 2001-2006 Models

Audi owners may complain of an odd smell from the car. It may appear as if coolant is leaking from the coolant reservoir. A pressure test on the reservoir may reveal that the hose between the coolant reservoir and the engine is weeping coolant through the hose material.

Tech Feature: Diagnosing and Repairing Cooling System Leaks on Hyundai Models

Cooling system problems will present themselves in a variety of ways, and it’s important that your service writer has the skills to ask the correct questions that will help your techs make efficient repairs.

Tech Tip: Sorento Coolant Reservoir Replacement

Some Sorento vehicles may overheat due to small cracks found on the bottom of the coolant reservoir as a result of repetitive temperature and pressure fluctuations.

Internal Engine Repairs: Uncovering the Culprits That Cause Head Gaskets To Fail

The first symptoms of a failing head gasket are usually a slow loss of coolant with no visible leaks, engine overheating and/or a check engine light with cylinder misfire codes. Uncover the culprits and prevent comebacks by following repair procedures to the letter.

Tech Tip: Saturn’s Slight Loss of Coolant/No External Leaks Evident

Some customers may comment that the low coolant light is coming on and/or the coolant level is low with no external leaks visible.

Porsche Engine Diagnostics: Misfire Codes, Fuel Trim Faults, Secondary Air Injection

Porsche has been building engines for decades that will literally fit in a suitcase, but are still able to put out horsepower that rivals many larger engines. Find out how to keep the Porsche Boxster engine running smoothly.

Tech Feature: Cooling System and Water Pump Service for the Nissan 3.5L V6

The cooling system on late-model Nissan Altimas and Maximas with the 3.5L V6 engine is similar to many other late-model vehicles in that the water pump is buried and typically takes two to three hours to replace depending on the model, year and your manual dexterity.

Porsche: Maintenance Essentials

Boost System Performance & Customer Satisfaction

Cooling System Antifreeze Requirements

When a customer brings you a vehicle that needs a coolant change, what kind of coolant should you use? The type of coolant specified by the vehicle manufacturer? A universal or “all makes, all models” type of coolant? Or should you run the old coolant through a recycling machine and put it back in the