Diagnostic Solutions: Identifying Ignition Switch Failure Symptoms
Although the basic ignition switch has remained unchanged for many years, the way it supplies electrical current to modern on-board electronics has made it a key factor when diagnosing intermittent failures in various electronic operating systems. Going back into automotive history, the ignition switch’s sole purpose on early imports was to energize the primary ignition
Alternator Altercation Electricity Fundamentals
Electrical principles, like voltage, amperage and resistance, can be described as cars passing along the roadway. Voltage was referred to as the vehicle’s speed, amperage as the number of vehicles on the road at the same time, and resistance as potholes in the road’s surface. Basically, electricity is a supply of atoms with an excess
Handling the Load
It takes a lot of amps to power the lights, electric defrosters, wipers, power windows, power seats, power liftgates, the ignition system, fuel injectors, fuel pump, cooling fan, A/C compressor, heater fan, heated seats, audio system and navigation systems on today’s late-model vehicles. Since alternators can generate only so many amps, their output may depend
Ignition Control Modules
Their Important Role in Creating Voltage at the Spark Plug Electrode
Battery, Charging & Ignition System Diagnosis: Getting Around those Difficult-To-Diagnose Faults
What do you really need to know about diagnosing and repairing starting, charging and ignition systems? Basically two things: that electrical and ignition problems are often difficult to diagnose (especially intermittent faults), and that a lot of electrical and ignition parts are unnecessarily replaced in an attempt to repair problems that are hard to diagnose.
Servicing Mazda Electrical Systems: Starting and Charging Diagnostics
While it sounds obvious, the battery is often overlooked when dealing with an electrical problem. Actually, the battery should be more of a maintenance item than a repair issue. I have to think by now all successful import specialist shops are relying on maintenance work to keep their bays profitable. Checking and servicing the battery
Battery Tech: How to Inspect, Charge and Replace
The first test of a battery is a visual inspection. There are certain things a technician should look for when inspecting a battery. Some things to look for include the quality of the connection from the battery to the cables. Cracks or other leaks can cause acid spills. Missing battery hold down hardware can cause
Diagnostic Solutions: Charging System Service
Drive belts are an often-overlooked component during routine maintenance service intervals Drive belts last so long on late-model imports that it’s very easy to forget about inspecting them during a scheduled maintenance interval. In the early days of import cars, drive belts didn’t last as long because many were made from a leather belt joined