Secondary Ignition Waveforms and Spark Plug Performance

Secondary Ignition Waveforms and Spark Plug Performance

There are at least 500 components in the modern car engine.

Sponsored by Autolite

Our favorite, and an often-under-rated part, is the spark plug. Spark plugs deliver the electric current from the ignition system in our vehicles to the combustion chamber of a spark-ignition engine, igniting the compressed fuel/air mixture with an electric spark. When thinking about secondary ignition waveforms, many auto pros will immediately think of ignition coils, but they should think of the spark plugs as well.

Secondary ignition waveforms are captured when you record the ignition event from when power is applied to the coil, to the point where the coil oscillates with the remaining energy. This ignition event can happen in 6-10 milliseconds, and one millisecond per division is usually the optimal time base depending on the size of the screen and the type of ignition system you’re running. They can also help determine the overall health of the ignition system components, including the spark plugs and coils.

It is imperative that you can confirm a known healthy secondary ignition waveform for a vehicle, so you can keep track of the wellbeing of the engine. Secondary ignition waveforms are largely influenced by spark plugs and the resistance of their two electrodes, also known as the burn line. The burn line from the secondary ignition waveform is the amount of time the spark is between the two electrodes, which can vary depending on the amount of air and fuel that pass between the two electrodes, and burn lines can tell you a lot about what is happening inside the combustion chamber.

If you experience a very turbulent combustion cycle, you’ll see spikes up-and-down, but if the fuel and air are properly distributed, the line on the graph should be smoother, with a little bit of a jump up and down – but nothing significant. If there is greater than normal resistance in the gap, the burn line may be long, while if there is no resistance with the electrodes being very close together, you will notice a very short burn line.

You can tell when the engine is experiencing a wasted spark just by looking at the burn line. Not only will the length of the line tell you the condition of the spark plug, but it can give you specific indicators about the spark plug – if the spark plug is worn out, damaged or if it needs to be replaced because the electrodes are pinched together.

Autolite has been focused on developing spark plugs since 1935. We have done the research and put in the hours to enhance the performance, durability and ignitability of plugs for domestic and import engines. Our latest advances in technology are our iridium spark plugs, Ultra and XP. These plugs offer the highest level of performance and limited lifetime warranties to show you we mean business. Explore the benefits of our new Iridium UltraÒ spark plugs at autolite.com.

You May Also Like

Key Considerations for ADAS Brake Jobs

As a technician, you could likely carry out a brake job in your sleep, but with automotive technology constantly evolving, what used to be a straightforward service can now require some additional steps and considerations to ensure that your customer’s brakes are in good working order. This is especially true when performing brake service on

As a technician, you could likely carry out a brake job in your sleep, but with automotive technology constantly evolving, what used to be a straightforward service can now require some additional steps and considerations to ensure that your customer’s brakes are in good working order. This is especially true when performing brake service on vehicles equipped with ADAS or Advanced Driver Assistance Systems. 

Considerations for Counter Professionals When Recommending Brake Pads to Electric Vehicle (EV) Owners

Counter professionals are often responsible for helping customers who may need some extra help purchasing the correct brake parts, so they must understand that brake pad recommendations should be specific to each customer’s vehicle type and driving applications. This is especially important as adoption of electric vehicles has increased in recent years and will continue

Enhancing Efficiency and Streamlining Operations: The Benefits of Utilizing Nexpart Multi-Seller for Repair Centers

In today’s fast-paced automotive repair industry, staying ahead of the competition is crucial for repair centers to thrive. One key aspect that can significantly impact operational efficiency and customer satisfaction is the availability of OE, Aftermarket, Heavy Duty & Salvage parts. Here are just a few advantages of incorporating Nexpart Multi-Seller, a cutting-edge parts ecommerce

The Answer to All Your RTV Sealant Needs? It’s Reinzosil® by Victor Reinz®

Whether you tackle occasional DIY projects or you work full-time in an auto repair shop, you probably have multiple tubes of silicone sealant lying around. And while RTV silicone is an ideal go-to product for a variety of jobs, there’s such an overwhelming assortment to choose from that it’s hard to know where to start.

What Causes Fuel Pumps to Fail?

Like most vehicle components, natural wear and tear is the unavoidable cause for parts replacement.  Fuel pumps are often out of sight and out of mind for most shop visitors. That’s because they are an as-needed repair and not typically a part of ongoing maintenance. Nevertheless, if you diagnose fuel pump failure, customers will want

Other Posts

The Impact of Fuel Type on Engine Performance

When recommending fuel options for customers, consider engine design, manufacturer recommendations and usage.

Drilled and Slotted Rotors

There’s real science behind the location of holes, slots and grooves in today’s brake rotors. Plus, they look great too.

Auto Pros Team Visits Hybrid Shop of The Carolinas

Auto Pros on the Road puts the Babcox team into shops across the USA. This episode is sponsored by Autolite.

Advanced Filtration Is Key to Vehicle Longevity

Let’s face it, we love our cars – and we drive a lot. According to statistics from the U.S. Department of Transportation, Americans drive more than 13,000 miles per year on average.  Although the miles continue to rack up on our cars and trucks, their overall shelf life keeps increasing.  Once upon a time, vehicles