Priming Concentric Slave Cylinders Before Installation

Priming Concentric Slave Cylinders Before Installation

These slave cylinders can be difficult to bleed if installed before they’re filled. Sponsored by LuK, a Schaeffler brand.

Concentric slave cylinders have been common in hydraulic clutch systems for many years.

These slave cylinders can be difficult to bleed if installed before they’re filled. Before installing a concentric slave cylinder, it’s best to prime it to get as much fluid in as possible.

This video is sponsored by LuK, a Schaeffler brand.

You May Also Like

Tesla Model 3 TPMS Service

Resetting and programming TPMS sensors for a Tesla is a lot like any other vehicle, and the challenge is still the same: keeping the light off.

One of the first items to be replaced on any Tesla model are the tires. This is due to tire wear from the instant torque of the electric motor. When replacing the tires, you will have to service the TPMS sensors. Tesla has used Baolong (from 2012 to 2014), Continental (from 2014 to 2020) and a proprietary sensor that uses Bluetooth. For 2021, the Model Y started to use a sensor that communicates using Bluetooth protocols. Not much is known about the new system except that the sensors are currently available only through Tesla.

Can You Jumpstart an EV?

First thing’s first: Find the LV battery, which could be anywhere in the vehicle.

Understanding What Antifreeze/Coolant Actually Does

Today, each manufacturer has its own formula for best results in their vehicles. This video is part of the Group Training Academy.

How The Vehicle Cooling System Functions

Here’s what to know to clarify cooling questions you’re asked at the service counter. This video is part of The Group Training Academy.

Oil Filter Housing Weak Points & Standard® Solutions

Engineers at Standard® have created a completely assembled Oil Filter Housing Kit.

Other Posts

Autel’s ADAS Bay Max Vehicle Lift

Learn how this lift integrates mechanical repair, four-wheel alignment, and ADAS calibration, prioritizing efficiency and space utilization in your shop.

Optimize Tesla Performance With E-Fluids

Learn the differences between ‘wet’ and ‘dry’ e-axles. This video is sponsored by CRP Automotive.

Understanding Fuel Trims

The fuel trims are what govern what’s going on inside the engine. This video is sponsored by Auto Value and Bumper to Bumper.

Understanding the OAD Pulley

Discover the ins and outs of OAD pulleys, their role in belt drive systems, and learn the tricks of diagnosis and replacement. This video is sponsored by Continental.