Mitch’s World, ‘BRUNSWICK DAYS’....

Mitch’s World, ‘BRUNSWICK DAYS’….

<

When the Day Begins With ‘Mission Impossible’

I call them “Brunswick Days” — those days where accomplishing anything feels as if it would be easier to go to the local bowling alley, pick out an appropriate sized ball, tuck it under your arm, head for the closest hardware store, pick up a 25-foot roll of garden hose, head back to the shop and then proceed to blow the ball through the hose until it exits at the other end.

If that sounds impossible, I would suggest it’s no more difficult than getting through the day at your shop or mine…Perhaps, even easier! This is especially true when the fates conspire against you and you find yourself with your lips pressed against three or four garden hoses simultaneously — each hose a different length, each hose with a different sized ball stuck in it someplace.

We have days like that; too many of them at times. And, it’s particularly distressing when they start to stitch themselves together into a week of bowling balls and garden hoses or, worse yet, perhaps even a month!

I think I just returned the last ball, at least the last one for this month, and retired the last garden hose. I hope that’s the case as I’m not sure if I have enough energy left to face another such challenge. It seems like we’ve been challenged enough over the past couple of weeks.

To tell you the truth, I’m not sure when I picked up the first ball or even how big it might have been. But, I’ll try. I’ll try to give you a look at what just a couple of those days looked like because in my heart of hearts, I’ll bet you’ve had a few just like them yourself.

It may have started with my niece’s vehicle. She’s not really my niece, but she practically grew up in my house. She is the daughter of one of my closest friends and has been hanging out with my son since they were both two years old. She’s married now, and driving one of my friend’s hand-me-downs. He is an aerospace engineer and meticulous about everything he does — everything. Vehicle maintenance is no exception. His vehicles are in for service every 3,000 miles with military precision and I’m not sure he has ever missed a service — ever.

Consequently, his vehicles run forever and he keeps them forever. He keeps them…or they slide down the supply chain from kid to kid.

This particular vehicle was a 1995 Altima with just over 140,000 miles on it. It ran magnificently for what it is, and his daughter was glad to have it. Soon after the acquisition of this vehicle, another one of dad’s cars found its way into their lives and the Altima went from the daughter to the son-in-law. While not as faithful to the father’s aggressive service schedule, they were still in for service on a regular basis — just not as regular.

The vehicle hadn’t been in for a while and the list of recommended services represented the time and mileage that had slipped by between services. There were a number of things that needed attention. With a two-year-old and one on the way, a new car was out of the question and there were no more well-maintained used cars left in the fleet. That meant returning this vehicle to a baseline of performance that included eliminating some pretty serious oil leaks at both the front seal and the seal between the block and the timing chain cover, as well as a number of normal maintenance items like brakes and engine tune.

It was a nice ticket with enough different kinds of work to ensure there was always something to do on the vehicle until the work was completed. Everything went well and our technician shattered book time on the job. We finished the work well before the promised time and were feeling pretty good about things in general. We started the vehicle only to find the engine oil pressure warning lamp on — low or no oil pressure.

The technician removed the oil pressure switch, installed a mechanical gauge and you could see the result in his body language. If you have ever attempted the front cover on that 2.4L engine, you know what a delight it is. The leak was gone, but there was no oil pressure. Time to head for the bowling alley. (OK, I know you Nissan guys already know what the problem is, but we hadn’t gotten there yet so don’t tell anyone. At least, not yet!)

We opened the vehicle up again, and started to look for anything that might be a problem. We checked everything, including pressurizing the pickup tube to find a leak. Everything looked great! While both the rod and the main bearings showed the signs of 141,000 miles of driving, they were still within acceptable limits and so were the measured clearances at the oil pump. Nothing out of the ordinary, nothing untoward. We put it back together and started it with the same ugly red engine oil pressure warning, only this time it was accompanied by an obvious engine noise.

Inhale…Blow! Inhale…Blow! Inhale…Blow Harder!
It came apart and went back together again, only this time with new rod and main bearings and a new oil pump. If nothing else, we would know the engine was capable of creating and maintaining pressure. I don’t know how we would know that, especially with the warning lamp on again.

Someone just switched bowling balls from a 12 pounder to a 15 pounder!

I got personally involved somewhere between the second or third disassembly and this last attempt to restore oil pressure. It’s hard not to get involved when you feel yourself bleeding to death! I kept going over everything we had done in my head, wondering what could have changed, wondering where the failure could have occurred. By this time, my lead driveability guy and I had already been under the vehicle getting dirty. We were touching stuff and taking things apart, as well as looking at them after they went back together. That’s where and when the vehicle starts to talk to you and tries to tell you what the problem is.

I went home that night and frankly, I didn’t get much sleep. I kept working this job over in head until it hurt — both the job and my head. I went in the next morning and went online to see if there was anything anyone else had ever run into that even remotely looked or felt like what we were going through. I found the vehicle and engine oil pressure symptoms on iATN and as I started to read the first or second response to a post that was eerily similar, the fingers on my left hand began to twitch. They were telling me they had experienced an irregularity on the lower pan surface — a divot or depression on the pan.

I never finished reading the response, not then. After we finished, I went back to learn that 18 out of the 22 responses pointed to the lower pan and clearance at the pick-up as the problem. The pan is ribbed, making it almost impossible to see an irregularity so slight. You have to feel it…or, know what to look for. The clearance between the oil pick-up orifice and the bottom of the lower pan is so tight that if it moves even slightly, you’re pretty much toast!

Was it that way before? I don’t know and neither does my tech. Did he do anything to cause the problem? He told me he didn’t. He supported the engine from above and had no reason to push up on the bottom of the pan with a jack or a jack stand. Did they hit something on the road before coming in? Who knows? According to the depression on the pan, I’d say no. I think the new gasket on the pick-up moved it deeper into the pan ever so slightly. I think the silicone sealer on the lower pan was thin enough to bring the pan up slightly. I also believe something hit the bottom of the pan at some time, but I have no idea what it could have been or when it happened. All I know is that we were the first ones to experience the ultimate result of that depression, and let me tell you it was depressing.

We removed the lower pan, beat it flat, re-installed it and watched the oil pressure rocket to 60 psi the moment the engine began to spin. It started and ran perfectly…and all it took was 30 or 40 hours to make it so!

That and that alone would have been enough to drive any normal person over the edge. But, you tell me — when was there ever just one event like that going on in your shop? In the middle of that, we were also dealing with a lunatic at the counter who insisted on an estimate to repair his vehicle well enough (and just well enough) to pass emissions testing — without the necessary inspection and testing required to diagnose the vehicle in order to create that estimate. We kept telling him that we needed to inspect the vehicle in order to estimate it. He kept telling us that we needed to tell him what it would cost to fix it before we even looked at it.

While that ring of our little circus was filled, we were dealing with still another crisis in the last bay that had to do with a customer who just couldn’t understand how they were contributing to the problem of getting their vehicle completed on time.

Three cars, three crises, three different sized bowling balls, three different lengths of garden hose. And, know what? I’m not even sure this was an unusual week! How sick is that?

You May Also Like

Being Happy Gets In The Way of Being Successful

Bryce Kenny says his greatest satisfaction comes from helping others to find the courage to chase their dreams.

When the workday is over, the tools are put away, the computers have gone to sleep, the customers have driven away safely and the last tech has clocked out, washed up and left the parking lot, do you ever just take a minute to put your hands on your hips, look around your shop, take a deep breath and think, “Is this really all there is to life?”

Do OEM Service Bays Offer Opposition or opportunity?

With great power, of course, comes great responsibility.

It Ain’t Bragging If You Can Back It Up

It can be difficult to sit and read about yourself.

Putting Yourself First For Safety

Policies and procedures are only as good as those following them.

Why Is NHTSA Involved With RTR?

A closer look into NHTSA’s involvement with RTR.

Other Posts

How Effective Are Non-Competes for Shops and Technicians?

NCAs restrict workers, hinder innovation, and impact employment options.

Is Your Shop Being Robbed Right Now?

How prepared are you for the bad guys?

Road Usage Taxes and Right To Repair

The federal gas tax has been around since 1932, and some state fuel taxes even longer.

Coffee, Cars and Casual Conversations

Vendors, suppliers, manufacturers and shop owners got the chance to visit the Babcox Media headquarters.