Key Programming

Key Programming

You might think that key programming is a job for a locksmith or specialist, but the market is changing.

Three situations might require key programming capabilities at your shop. First, being able to diagnose and program keys can be a tool as part of some no-start diagnostics. Second, you may run into a situation where a key or fob needs to be reprogrammed to the vehicle if a module was replaced. Third, a customer might want an extra key, or all the original keys were lost.

You might think that key programming is a job for a locksmith or specialist, but the market is changing. Brick and mortar locksmith and dealership parts departments can cut key blanks, but it is up to you to make them work with the vehicle. In the case of some proximity keys, there is no key to cut – it is all up to you.

For most vehicles at your shop, it is not as much about programming a key to the car, but programming the car to the new key. Programming a vehicle to the key might require a procedure to put the vehicle into a learn mode; this is typically called “onboard” programming.

Newer vehicles require a scan tool to learn a new key or remote to perform onboard programming. You might already do this at your shop if you have the right scan tool and software.

Onboard procedures use the antenna coil on the vehicle to read the transponder or ID number in the new key or remote. The vehicle gets the key’s transponder to transmit, and the unique ID is learned by the vehicle during the procedure.  

PIN CODES

One of the changes made to some late-model vehicles is the requirement to have a three- or four-digit PIN code to perform onboard programming. This code resides in the module for the immobilizer system. 

You can contact the OEM for the code, or, in some cases, it might be found in the owner’s manual if you are lucky. But, some key programming tools can harvest the PIN code from the modules. VW and other makes require PIN codes, depending on specific model years.

PROGRAMMING KEYS

To increase security, some OEMs are requiring the key to transmit more than just the ID code. VW and other European manufacturers are requiring that the key transmits the unique VIN of the vehicle. Specialty key programming tools can program the transponder code and VIN onto a key.  

REFLASHING AND REPROGRAMMING

Data can go both ways when it comes to some key programming tools. Information from a key can be programmed into a module, or information from an existing model can be programmed onto a key. This tool function can save you if a module has been replaced or reflashed and the key information is lost. It is also helpful if you are in a situation where all the keys have been lost. 

For situations like this, you have several options. Some key programming tools and vehicles will allow you to clone key transponders in the memory of the vehicle. The key programming tool communicates with the vehicle to find the information about the existing keys, and then burns that code to a new transponder using a specialized attachment for the key. It may call for reflashing completely new transponder codes to a module. For some cars, this can be performed through a J2534 interface. Other cases may require the module or EEPROM chip to be removed for reprogramming.  Specialized key programming tools let you do it at your shop. 

The key and fob for modern vehicles are more than a key. They can start a vehicle remotely, open a rear hatch with a swipe of a foot, and make sure the vehicle is secure against physical and virtual attacks. If you are already servicing these vehicles, you can’t avoid key programming.

You May Also Like

Servicing Mercedes-Benz AMG Brakes

Take a look at some of the things you need to know in order to service the brakes on a Mercedes-Benz AMG vehicle.

AMG is the performance line of Mercedes-Benz vehicles, just like Nismo is to Nissan, and M is to BMW. I can tell you from experience that there are many exciting vehicles wearing that AMG badge. They’re powerful, luxurious and they make a sound unlike any other.

But, just like all motor vehicles, they require service from time to time. Slowing the vehicle down from high speeds takes a toll on the brakes, wearing them down over time. So, today let’s take a look at some of the things you need to know in order to service the brakes on a Mercedes-Benz AMG vehicle.

Air Ride Diagnostics: Reservoirs and Compressors

The secret to diagnosing air ride problems is knowing what criteria the system uses to regulate the compressor/reservoir and having the right tool.

Audi A New Seal on The Block

The PTFE seal provides a wider operating temperature and a low coefficient of friction.

VW HVAC Service

Volkswagen HVAC systems have come a long way.

BMW DSC Module 

If any of the situations apply, follow the correction procedure.

Other Posts

Now Available – February’s Digital Edition of ShopOwner

February’s issue includes technical and management content and is free to download.

Timeless Quotes Teach & Inspire

Here are six quotes that every shop owner should live by.

Now Available – January’s Digital Edition of ShopOwner

January’s issue includes technical and management content and is free to download.

EV Charging

Charging will get better as technology improves and drivers change their behaviors.