Models:
2017 F-PACE V6 3.0L Supercharged
2014-2017 F-TYPE V6 3.0L Supercharged/V8 5.0L
2017 XE V6 3.0L Supercharged
2017 XE V6 S/C 3.0L Supercharged
2016 XF V6 S/C 3.0L Supercharged
2010-2015 XF V6 3.0L Supercharged/V8 N/A 5.0L V8
2010-2016 XJ V6 N/A/Supercharged 3.0L/V8 5.0L
2010-2015 XK
Condition:
A humming noise may be evident from the engine when the engine is idling.
Cause:
This may be caused by dust or water ingress to the accessory drive belt idler pulley bearing.
Service Procedure:
The idler pulley bracket assembly (C2D51367) must be replaced as a complete assembly and must not be dismantled to a lower level.
1. Remove the T-connector from the air cleaner outlet pipe.
2. Note the position of the accessory drive belt.
3. Remove the accessory drive belt from the idler pulley.
> The fasteners must be retained for re-use.
> Do not discard the original idler pulley assembly.
4. Remove the accessory drive idler pulley and bracket assembly.
5. Install the new accessory drive idler pulley and bracket assembly. Torque: 25Nm
6. Make sure that the accessory drive belt is correctly located on each pulley.
7. Install the accessory drive belt.
8. Install the T-connector to the air cleaner outlet pipe.