How's Business? Zooming In On Aftermarket Indicators

How’s Business? Zooming In On Aftermarket Indicators

Macro- and micro-level economic data can give a good indicator on the state of the automotive aftermarket.

When looking at conditions in the automotive aftermarket, you can pick what level you want to analyze. You can step back and look at the macro level, examining “big-picture” indicators that measure the whole economy or the entire industry. You also can zoom in at the micro level and see what is affecting individual shops. This month, we’re going to do both.about:blank

At the Macro Level

Here at the macro level, we often rely on government data. Let’s start with Vehicle Miles Traveled (VMT). As this is being written in late March, the Federal Highway Administration has released its estimate of vehicle miles traveled for January. For the nation as a whole in January, we were down 11.3% compared to January 2020. Since July of last year, we’ve been consistently down from 9% to 12% compared to the previous year. In January, the Northeast region was down the most at 16.2%. In comparison, the South Gulf states are down only 7.9%, and the rest of the country is down between 11% and 12%.

More up-to-date VMT data, in the Auto Care Association’s proprietary TrendLens, show February data to be improving a bit more than this. As more offices and schools open and lockdown restrictions on leisure activities end, roads should be getting even busier.

People also are spending on their cars. The Monthly Retail Trade report from the Census Bureau shows that sales at Automotive Parts, Accessories, and Tire Stores in January 2021 was up 7.8% over last January. This is confirmed by the strong financial performance of the retail auto parts companies. (See “Hindsight 2020” from the March issue of AMN.) Couple that with a stronger-than-expected bounceback in new-vehicle sales (at least until the chip shortage put a crimp into the new-vehicle supply) and you can say that trends at the macro level look good for the aftermarket.about:blank

At the Shop Level (Micro)

What do things look like when we zoom in at the level of the individual shop? How have independent repair facilities fared in these “challenging times”? In February, we surveyed more than 230 readers of ShopOwner to see about their experiences during the pandemic year. Looking at the bottom line first, we asked, “Because of COVID-19, how would you describe your revenue for 2020 compared to 2019?” Half the respondents said that revenue was up or flat for the year.

The results here may be skewed a little on the optimistic side, for if a shop had closed due to the lockdown or the resulting recession, we may not have been able to reach them for the survey. Even so, the results still shows some strength in the aftermarket.

We also asked when they thought sales for their business would be “back to normal.” Half of them indicated they had already reached that point, with a third of the respondents saying they had reached normality last summer. Less than 10% of the respondents were on the pessimistic end of the scale, saying they didn’t think sales would ever get back to normal.about:blank

One thing that helped sales was that most shops did not face a prolonged shutdown. The movement to designate auto care as an essential business seems to have been successful. Almost nine out of 10 shops said they have not been shut down due to COVID-19 concerns or government mandates. Of the 12% who said they had, most report that the restrictions have been lifted.

While shops are remaining open and busy, when it comes to the supply chain for parts and supplies, it appears things are getting a little tighter. Only 30% of the respondents say they have been able to get what they need without extra effort. The rest all report some amount of tightening, although with most it has been minor.

We asked this same question in September 2020, when we were conducting our annual P.A.R.T.S. survey, although in September, we did not have the last option of having problems that have been cleared up. In September, only 13% said they were starting to see some shortages, while 7% reported lots of problems. Back then, 36% said that they were able to get what they needed without extra effort. So it appears there has been a small amount of tightening in the supply chain. This could be the aftereffects of parts plants that were shut down earlier as part of the lockdown, or it could be due to the effects of port congestion on the West Coast. The pandemic also has affected how shops are doing training on new products and new technologies. Over half the respondents report doing more virtual training than they did before the pandemic, with a third of the respondents saying they have gone all-virtual for training.

This article is courtesy of Counterman.

You May Also Like

Check Out The August Digital Edition Today

The August issue includes technical and management content and is free to download and read.

The interactive and easy-to-use digital edition of ShopOwner’s August issue, featuring articles from ImportCar, is available now.

Click here to read the August issue

In addition to management topics and opinion pieces, this issue includes technical articles on identifying the proper coolant for import vehicles; dealing with VW/Audi's boosted crankcase pressures; and more.

Now Available – The July Digital Edition

The July issue includes technical and management content and is free to download and read.

Check Out The June Digital Edition Today

The June issue includes technical and management content and is free to download and read.

Now Available – The May Digital Edition

Every issue of ShopOwner includes technical and management content from a variety of ShopOwner channels.

Check Out The April Digital Edition Today

The April issue includes technical and management content and is free to download and read.

Other Posts

The March Digital Edition Is Ready To Read (For Free)

The March issue of ShopOwner includes technical and management content from ImportCar – available now.

The February Digital Edition Is Ready To Read (For Free)

Every issue includes management and technical information from multiple ShopOwner channels.

Building The Perfect Future By Mentoring

Share your stories of how you have helped others reach their goals.

The January Digital Edition Is Ready To Read (For Free)

The January issue of ShopOwner includes technical and management content from ImportCar – available now.