GDI System Overview & Common Failures (Video)

GDI System Overview & Common Failures (Video)

GDI Systems are changing with fuel economy standards and emissions regulations. Sponsored by Standard Motor Products.

CC: Fuel economy standards and emissions regulations have continued to tighten in recent decades. To stay in compliance, OEMs have turned to gasoline direct injection (GDI) systems in late-model vehicles. These systems are able to measure and control the amount of fuel entering the combustion chamber more accurately, boosting fuel economy and maximizing power output. Let’s begin with an overview of the system, then we’ll look at a few common failures you may come across in your shop.

The low-pressure fuel pump is mounted inside the fuel tank, and it sends fuel through the fuel lines and up to the high-pressure fuel pump. This pump is typically mounted on the engine and is driven by a lobe on the camshaft. The fuel pressure is then increased to extremely high pressures – some applications may see 3,000-5,000 psi. The fuel then travels to the injectors which are mounted inside the cylinder head and injected directly into the combustion chamber.

So why does the fuel pressure need to be so high? Port fuel injectors spray fuel in a vacuum, and that vacuum draws the fuel vapors into the combustion chamber. But direct injectors need to be able to overcome the higher pressures seen inside the combustion chamber, so the fuel pressure needs to be much higher compared to port injection.

The increased fuel pressure has another benefit – the fuel is able atomize much better compared to port fuel injection. The more atomized the fuel is, the better it burns, and the engine can run much more efficiently. In many late-model vehicles, lower displacement engines with GDI are able to make 20% more power with 20% less displacement when compared to bigger engines from a decade ago.

Whenever servicing a GDI system, keep an eye out for the following common issues. It’s especially important that the engine oil is changed according to the OEM maintenance guide. It’s just as important to use the correct viscosity and type of oil, regardless of vehicle age or mileage. If the oil is not regularly changed, or if the incorrect oil is used, it could spell disaster down the road. It can speed up the formation of carbon deposits on the intake valves, but it can also lead to abnormal wear on the camshaft lobe which drives the high-pressure fuel pump.

Finally, the fuel lines after the HPFP feature specialized end fittings which seal against the mating surfaces on the pump and injectors. These end fittings will leak if they are improperly tightened. In many applications, you may be required to replace the line any time it is removed. So, be sure to check the OE service information before starting the repair.

This video is sponsored by Standard® Brand.

You May Also Like

Optimize Tesla Performance With E-Fluids

Learn the differences between ‘wet’ and ‘dry’ e-axles. This video is sponsored by CRP Automotive.

In this video, we dive into the crucial role of technical fluids in maximizing Tesla's performance. Discover the newly launched Pentosin Tesla E-fluid range, including Pento EDF-2 and ATF 64 profiles applicated for Tesla models 3, Y, S, X, and Roadster. Learn the differences between 'wet' and 'dry' e-axles and how Pentosin specialized fluids ensure peak efficiency in these electric vehicles.

Understanding Fuel Trims

The fuel trims are what govern what’s going on inside the engine. This video is sponsored by Auto Value and Bumper to Bumper.

Understanding the OAD Pulley

Discover the ins and outs of OAD pulleys, their role in belt drive systems, and learn the tricks of diagnosis and replacement. This video is sponsored by Continental.

The Future of MEMA with Bill Long

MEMA looks to the future as it celebrates 120 years making a big impact.

How-to Complete Emissions Monitors Faster

This video will focus on how a product like CAT COMPLETE can improve the chances of completing the monitors faster. This video is sponsored by Rislone.

Other Posts

How Important is Regenerative Braking For EVs?

Regenerative braking helps to increase the overall efficiency and range of the EV, increasing the range of an EV by up to 20%.

BEV Brake Service Tips

Andrew Markel shares his latest service tips in the all new BendPak EV Garage video series.

Get to Know Performance Ride Technology

PRT is a global OE supplier with more than 5,000 products available in the United States.

PRT Heavy Duty Highlights Shocks for Commercial Vehicle Applications

Learn to install PRT Heavy Duty’s gas-charged shocks for enhanced driving stability in trucks and buses.